Search found 115 matches
- Fri Jan 24, 2014 5:21 am
- Forum: Fordson Dexta
- Topic: More on Stabiliser bars
- Replies: 23
- Views: 40055
Re: More on Stabiliser bars
Ben, long adjustable stabilizer bars are common and easy to get here in the states..... couple of examples : http://www.tractorsupply.com/en/store/countylinereg%3B-adjustable-stabilizer-arm http://www.ebay.com/itm/Ford-Tractor-Adjustable-Stabilizer-Bar-ABC2010-/221358845603?pt=BI_Heavy_Equipment_Par...
- Sun Nov 24, 2013 6:30 am
- Forum: Ford World Series
- Topic: year of manufacture
- Replies: 2
- Views: 5985
Re: year of manufacture
Looks like 1968 Aug 29th....
8 = 1968 , H = Aug , 29 = day of month ...
Here's a link that explains these pretty well ..
http://www.springfieldbiz.com/oaktree/r ... erial.html
8 = 1968 , H = Aug , 29 = day of month ...
Here's a link that explains these pretty well ..
http://www.springfieldbiz.com/oaktree/r ... erial.html
- Mon Feb 11, 2013 7:54 am
- Forum: Fordson Dexta
- Topic: Help required getting Hydraulics’ working
- Replies: 12
- Views: 13144
Re: Help required getting Hydraulics’ working
The workshop manual has a pretty good bit on troubleshooting the hydraulic lift....... Start with the simple: Is the selector knob on the auxilary service plate pushed all the way in? If it's pulled out, no flow to the lift. Pull the small plug out of the side of the pump, bump the starter (stop cab...
- Mon Oct 15, 2012 4:50 am
- Forum: Fordson Dexta
- Topic: cleaning up the glow plug
- Replies: 12
- Views: 13131
Re: cleaning up the glow plug
Drain for the block is just below the fuel filter.
S/b a drain on the radiator also. Look below the lower radiator hose.
S/b a drain on the radiator also. Look below the lower radiator hose.
- Tue Oct 09, 2012 5:50 am
- Forum: Fordson Dexta
- Topic: cleaning up the glow plug
- Replies: 12
- Views: 13131
Re: cleaning up the glow plug
Agriline shows a "Fuel Tap/Jet for Manifold" on their website for a Dexta.. wasn't clear to me from the pic if it just a shutoff, or a shutoff and nozzle....you could email them or give a ring and ask. I think, but am not sure, it's the version that was installed on the tractors originally sold in B...
- Tue Oct 09, 2012 4:55 am
- Forum: Fordson Dexta
- Topic: Hit a stump. STEERING problems
- Replies: 22
- Views: 18317
Re: Hit a stump. STEERING problems
Glad you got it working again...you never know what you'll find when you start poking around in old machinery eh. Got busy this week and just got around to logging on again. to answer the question further up about the beach: Been going to Topsail Island (just south of Camp Lejune) since I was a kid,...
- Thu Sep 27, 2012 5:13 am
- Forum: Fordson Dexta
- Topic: Hit a stump. STEERING problems
- Replies: 22
- Views: 18317
Re: Hit a stump. STEERING problems
Does this steering column move up and down or does it twist. If it moves up and down by way of the fast threads, then I may see my problem. If it twist, then...... It must move up..... gotta go look at my drawings. OK, read the manual about the steering. It does move up and down by way of worm gear...
- Mon Sep 24, 2012 6:09 am
- Forum: Fordson Dexta
- Topic: Dexta owner / worker newbie
- Replies: 13
- Views: 11817
Re: Dexta owner / worker newbie
Good to see another South Carolinian on here.. hope you get on well with the Dexta... There is a ford 3000 at my dad's place..gas engine, 4 speed trans, standard pto..... most work I'd rather do with my Dexta.. live pto makes the mowing much easier, the diesel pulls much better even though it's rate...
- Mon Sep 24, 2012 5:56 am
- Forum: Fordson Dexta
- Topic: thermostat
- Replies: 2
- Views: 3062
Re: thermostat
The end with the big spring and 'bulb' goes into the block..... They originally came with 160 degree thermostats (at least mine had one in the 70's when I got it).....these don't seem to be available anymore.....170 to 180 degree should be fine...what you don't want is the coolant boiling in the rad...
- Mon Sep 24, 2012 5:37 am
- Forum: Fordson Dexta
- Topic: Hit a stump. STEERING problems
- Replies: 22
- Views: 18317
Re: Hit a stump. STEERING problems
gotta agree, sounds likely bearing is knackered ...possibly the 'top nut' also. The bearing assembly holds the steering 'top nut' and steering wheel in place.... this 'top nut' is not the one you see when assembled, but is the name in the parts book for the piece that threads over the steering shaft...
- Tue Sep 18, 2012 5:50 am
- Forum: Fordson Dexta
- Topic: Starts perfectly but then loses revs, but okay after 30 ses
- Replies: 9
- Views: 11127
Re: Starts perfectly but then loses revs, but okay after 30
Sure has all the markings of a fuel problem of some sort......My advice is to work through the system till you find it....starting with the easier (and cheaper) things first...tank,cap and petcock, filters, 'lift' pump (electric on yours) , fuel lines .... Make sure it's not starving the injection p...
- Sat Sep 15, 2012 4:59 am
- Forum: Fordson Dexta
- Topic: Starts perfectly but then loses revs, but okay after 30 ses
- Replies: 9
- Views: 11127
Re: Starts perfectly but then loses revs, but okay after 30
couple of things come to mind. 1) Did you check the strainer in the tank, attached to the petcock? if you're getting good flow at petcock it's probably ok. possibly a large bit of trash floating around in the tank? but it sounds more like.......... 2) wrong fuel cap can cause problems.....fuel cap n...
- Thu May 10, 2012 2:14 am
- Forum: Fordson Dexta
- Topic: Brake cross shaft oil leak
- Replies: 7
- Views: 6712
Re: Brake cross shaft oil leak
Doubt you will find a new shaft. Look into speedi-sleeve kit(s) for it.
I welded mine up and re-turned in a lathe, but I have free access to a small machine shop.....probably not a good choice if you're paying going rates.
I welded mine up and re-turned in a lathe, but I have free access to a small machine shop.....probably not a good choice if you're paying going rates.
- Wed May 09, 2012 4:40 am
- Forum: Fordson Dexta
- Topic: governor settings
- Replies: 1
- Views: 2820
Re: governor settings
The only procedure I've ever seen requires a test stand to set this.... A couple of other things come to mind though...... 1) pull the side cover off the pump and make sure the spring is pushing the control linkage up against the stop (engine off). 2) is the diaphram stiff ? try massaging a bit of p...
- Wed May 09, 2012 4:09 am
- Forum: Fordson Dexta
- Topic: Dexta & Super Dexta
- Replies: 10
- Views: 12422
Re: Dexta & Super Dexta
Mine squirts a thin stream of diesel, not a spray. If you give the 'pump' a good push, it is strong enough to hit the heater coil. Don't know if it managed a spray when it was new or not...I was too young a chap to play with the tractor then :roll: There is small check ball and spring in the inlet s...
- Sat May 05, 2012 3:24 am
- Forum: Fordson Dexta
- Topic: newbe with a super dexta
- Replies: 2
- Views: 3380
Re: newbe with a super dexta
valve clearances - .010" warm engine ..
#1 cyl on tdc - compression stroke ....adjust valves 1,2,3,5 (count from front of engine)
#1 cyl on tdc - exhaust stroke ....adjust valves 4,6
Move the small inspection plate on the left side of clutch housing to view tdc mark on flywheel...
#1 cyl on tdc - compression stroke ....adjust valves 1,2,3,5 (count from front of engine)
#1 cyl on tdc - exhaust stroke ....adjust valves 4,6
Move the small inspection plate on the left side of clutch housing to view tdc mark on flywheel...
- Wed Apr 18, 2012 3:47 am
- Forum: Fordson Dexta
- Topic: brake and clutch rods bent... but need to be??
- Replies: 13
- Views: 16141
Re: brake and clutch rods bent... but need to be??
I've seen people bend them on purpose, to shorten them up when they run out of adjustment on the turnbuckles...or the turnbuckles seize.
- Wed Apr 18, 2012 3:42 am
- Forum: Fordson Dexta
- Topic: New Shredded fanbelt..
- Replies: 15
- Views: 11246
Re: New Shredded fanbelt..
Soooo, a new rebuilt generator I guess is the solution? Your choice, generator or alternator.....if you're concerned about keeping it original, go with a generator....around here at least, there are shops that can rebuild them, or new ones aren't too hard to find online. if you want to fabricate th...
- Sun Apr 15, 2012 1:47 am
- Forum: Fordson Dexta
- Topic: Downswept exhaust
- Replies: 1
- Views: 2678
Re: Downswept exhaust
new ones are available from most of the online suppliers......
here is ONE example
http://www.ebay.com/itm/Fordson-Dexta-S ... 51874dfc63
check agriline,silver fox tractor spares, many others........
here is ONE example
http://www.ebay.com/itm/Fordson-Dexta-S ... 51874dfc63
check agriline,silver fox tractor spares, many others........
- Sun Apr 15, 2012 1:26 am
- Forum: Fordson Dexta
- Topic: Number on con rod bearings
- Replies: 4
- Views: 4214
Re: Number on con rod bearings
First, thanks to your answer. Have checked today my diamater of the crankhaft and, sh****; 1) 57.1mm 2) 57.1mm 3) 56.6mm So my third cylinder is somehow damaged :( or possibly #3 was reground .020 (in) undersize at some point in the past... It's common practice to regrind all at the same time, but ...
- Wed Apr 11, 2012 4:26 am
- Forum: Fordson Dexta
- Topic: Number on con rod bearings
- Replies: 4
- Views: 4214
Re: Number on con rod bearings
According to this thread, probably standard size. http://www.fordsontractorpages.nl/phpbb3/viewtopic.php?f=3&t=2402 Measure the crankpins and see what size they are, and if they need a re-grind.(out of round,scored,pitted).... Get yourself some plastigage and check clearances on reassembly, whether ...
- Tue Mar 13, 2012 3:36 pm
- Forum: Fordson Dexta
- Topic: Position control pin
- Replies: 9
- Views: 10706
Re: Position control pin
Tku Commander ......... Why was there an O ring in the first place if it's not necessary? Rob Well, we would have to find the engineer that designed the thing to be sure :roll: , but I suspect it was a cost saving measure.. Later versions went to a metal 'seal' similar to a piston ring. Probably ha...
- Tue Mar 13, 2012 3:10 pm
- Forum: Fordson Dexta
- Topic: injector pump super dexta needed
- Replies: 7
- Views: 12738
Re: injector pump super dexta needed
Take a look at your fuel filler cap (on the fuel tank) also...It needs to be a vented type, and the vent needs to be open, not plugged with rust or dirt.. The oil filler caps will fit on the fuel tank, but aren't vented. They often get switched around, or fuel cap gets replaced with wrong type. Some...
- Mon Mar 12, 2012 6:49 am
- Forum: Fordson Dexta
- Topic: Position control pin
- Replies: 9
- Views: 10706
Re: Position control pin
Instructions for doing all the linkage adjustments can be found in the wiki on this site, along with some troubleshooting info.. No lift can be caused by a number of things....a common reason is a sticking (stuck) unload valve in the valve chest. The unload valve is between the lift cylinder and the...
- Sat Mar 03, 2012 6:05 pm
- Forum: Fordson Dexta
- Topic: Position control pin
- Replies: 9
- Views: 10706
Re: Position control pin
Find the cross shaft that goes through the cover, the one the lift arms attach to. In the center is an arm that the lift cylinder pushes on via a large round rod. On one side of this arm (called a 'ram arm' in the parts book) is a cam. The cam is cast is one piece with the arm......the position cont...