The Fordson Tractor Pages Forum

Hi,
There are lots of difference answers to this question, I will say that a standard Dexta without weights can only cope with a 2frw plough.
It is reasanable to expect it to plough at 11"W x4"D in stubble ground.
LLANFAIR.

Hi, Marcusgs
There is supposed to be a bracket that fit's to the rear of the injector pump this has a small clamp to secure the outer cable.
Hope this helps.
Llanfair.

Hi Ncfcdexta
The original head lights on the dexta were Butlers and have( Butlers ) on the top of the lens.
If you require reflectors Vapromatic repros are the correct size and the original butlers can be siliconed in.
Cheers Lanfair.

Hi Conar22 I had my block fitted with Vapromatic pistons and liners these pistons were also proud of the block, i contacted an ex perkins engineer who told me the pistons should be machined level to 0.01mm below . Using a gauge to make certain of TDC i used a large file and emery tape so that they w...

Hi Jim
The input shaft cannot be removed without removing the bell housing, there is an input shaft retainer in the housing.
Hope this helps, good chance to check the clutch anyway.
Regards John.

Hi Nick
The problem you have is maybe that you have not turned the engine over for long enough to fill the the oil filter bowl with oil,
There will be no oil flo anywhere until this is full and the oil pressure relief valve opens.(don't panic)
Llanfair.

Hi Jim
There is a Dexta starter currently on eBay (DEXTA) 5 days left.

Regards
JOHN

Hi Gavin
I think i would have the head skimmed, New valve inserts & guides fitted at a good machine shop. Better the devil you know than the one you don't.
Good Luck
JOHN

PS See Russelms post Mon Jul 5.

Hi Landowner,
there are 15x5/16" ball bearings in the top bearing, There are no metric sizes on a Dexta.
I don't think sized radias bolts will cause heavy steering, Steering box oil seals may have gone so no oil. No easy solution.
Regards JOHN.

Hi ddoan
Good pics, I think you have the wrong quadrant lever fitted, the original lever and disc plate are one piece and quite a different shape. (the one you show maybe for a ferguson T20etc ) This part does not ware ,so a scrap tractor may be an option.

Regards LLanfair.

Hi
Can anyone out there tell me wich model majors were fitted whith
the Ford (ENFO) light/ign switch, look forwad to your replies.

Ross
The exhaust manifold nuts are 5/16 UNF (BRASS)
Injectors are 3/8 UNF.
Available at most agricultural dealers.

Regards LLANFAIR.

Hi Dexta4
Some time ago i had a pair from dunlop tractor spares
028 2565 2560 They were excellent quality and were on my door step next day.
Good luck
LLANFAIR.

Hi Npaisnel, I do not think you need to strip the switch again, if you brush and wash the back of the switch all markings are clearley marked on back plate. The correct possitions are, Fully Right =Side & tail only Next Left = Everything off 2nd Left =Side Tail And dipped head lights 3rd Left = Side...

Hi Mike
Thanks for your suggestions, but i am doing a restoration and need to keep it original.
Regards
JOHN.

Hi Folks
Can anyone help ! i require a scrap Dexta leveling box, I only require the winding handle (broke mine trying to straighten it)
Regards JOHN.
Mid Wales.

Hi Dietmar,
Do you have the ignition/light switch.
Switch can be us as all i want is the ignition lock barrel, key not important. If you have please let me have a quote.
Regards, Llanfair.

Hi Ben
Maybe worth a try , Remove the four bolts holding the gearsticks
and lift of , if selectors are not in line you can use a tyer lever to move shaft to centre. DO NOT USE EXCESSIVE FORCE
Good luck.
LLanfair.

Hi terry,
As your brake shoes have bonded linings and you intend replacing with riveted linings are the shoes drilled to suit, (only a thought)
Regards LLANFAIR.

Misunderstanding, The original seat on my 1959 dexta is the same as the one on your tractor, but has a bulge in the front and two D shaped holes. Sorry about the exactly.
Regards, LLANFAIR.

Hi, npaisnel Thanks for replying to my question (number plate light) i shall look forward to your images. By the way the tractor seat you have restored is the same as originally fitted to my 1959 dexta. According to my dexta history book bonnet badges were not fitted until the new style dexta 1960 a...

HI, Can anyone out there tell me the correct wiring route for the rear number plate light on my 1979 Dexta.
Regards, Llanfair.