Search found 122 matches
- Mon Jul 03, 2017 9:22 pm
- Forum: Fordson Dexta
- Topic: Super dexta back end
- Replies: 14
- Views: 16892
Re: Super dexta back end
Kiwi, i may be able to help you out. Do you need the long spring inside the lift cover, or the short one? The long spring (the one that's attached to the huge spring outside) i have lying on my workbench, the short one will need to be removed first. Just let me know, i'll be happy to ship some parts...
- Wed May 17, 2017 8:05 pm
- Forum: Fordson Dexta
- Topic: looking to buy a dexta
- Replies: 3
- Views: 6165
Re: looking to buy a dexta
Hi Mathias, i would not pay more than some 300 euros for this Dexta then. If there is a serious problem with the engine, it could get really expensive to have it fixed. Plus the fenders and nosecone are expensive if you want to buy them new. If it doesn't work out, you will probably earn your money ...
- Sat Mar 11, 2017 12:54 pm
- Forum: Fordson Dexta
- Topic: 58 Dexta - Belt rubbing lower radiator hose
- Replies: 6
- Views: 9042
Re: 58 Dexta - Belt rubbing lower radiator hose
Yes, that is right. Mine looks tight too. There is supposed to be a slight bend in the hose, towards the timing cover. That will keep the hose away from the belt. But i agree it is kind of tight in there. You might consider releasing the hoseclamp at the waterpump and twisting the hose sideways a li...
- Sat Mar 04, 2017 1:27 pm
- Forum: Fordson Dexta
- Topic: Thrust washer on lift cross-shaft.
- Replies: 39
- Views: 44161
Re: Thrust washer on lift cross-shaft.
Gentlemen, i have good news and less good news. I found one thrust washer in two lift covers. I would love to help both of you but i only have one washer. The washer is nothing more than a washer. Nothing fancy. A flat steel washer with an outer diameter of 68.2 mm, an inner diameter of 51.2 mm and ...
- Sat Mar 04, 2017 11:11 am
- Forum: Fordson Dexta
- Topic: Thrust washer on lift cross-shaft.
- Replies: 39
- Views: 44161
Re: Thrust washer on lift cross-shaft.
Gentlemen i will check my projects.
I might have washers, but i am not 100 % sure.
This weekend i will open up my two spare rear ends, and check for washers.
If i have them, i will let you know.
Regards, Rob
I might have washers, but i am not 100 % sure.
This weekend i will open up my two spare rear ends, and check for washers.
If i have them, i will let you know.
Regards, Rob
- Sat Jan 28, 2017 9:30 pm
- Forum: The PARTS SWAP forum!
- Topic: Dexta Upper Lift Arms
- Replies: 7
- Views: 11286
Re: Dexta Upper Lift Arms
Yes i am sure. I needed a shifter fork so i called a retired mechanic, who repairs Dextas for a hobby. He did have a shifter fork for me, but it was still attached to a gearbox and rearend. He almost gave it to me for free. It has been in my garage ever since. If we want to keep our tractors running...
- Fri Jan 27, 2017 9:02 pm
- Forum: The PARTS SWAP forum!
- Topic: Dexta Upper Lift Arms
- Replies: 7
- Views: 11286
Re: Dexta Upper Lift Arms
And they're off. I read your request and as i have a spare rearend of a Dexta in my shed, i sprayed it with penetrating oil. Tonight the lift arms came free. Both weigh 6.3 kilograms, including the bolts and washers. I don't know yet what the shipping charges would be, but if you agree to pay for th...
- Tue Aug 12, 2014 8:57 pm
- Forum: Fordson Dexta
- Topic: Stuck engine, stuck injectors
- Replies: 12
- Views: 11165
Re: Stuck engine, stuck injectors
A couple of years ago my neighbour called me with the same problem, engine stuck.
It turned out he had so much sand in the cilinders that they could not finish their stroke.
I had to remove the cilinder head to clean it all out.
Then i explained the purpose of the oil in the air filter.
Regards, Rob
It turned out he had so much sand in the cilinders that they could not finish their stroke.
I had to remove the cilinder head to clean it all out.
Then i explained the purpose of the oil in the air filter.
Regards, Rob
- Mon Jun 09, 2014 11:50 am
- Forum: Fordson Dexta
- Topic: Non Starter
- Replies: 3
- Views: 3828
Re: Non Starter
Hello Dexydog, If the previous owner used easystart, there's a chance that the piston rings are broken. The compression test might show this. All the requirements seem to be there, injectors working, engine spins etc. I would check the airflow too. During the summer the engine should start without t...
- Sun Jun 01, 2014 10:25 am
- Forum: Fordson Dexta
- Topic: tipper lift
- Replies: 12
- Views: 11600
Re: tipper lift
Hi Sky Blue, i don't know what you mean exactly, but the Dexta can lift about 625 kilograms, some 1250 pounds with the lift arms.
Of course with an extra tool, which may put the load further away from the rear axle, this max. weight becomes less.
Hope it helps.
Regards, Rob.
Of course with an extra tool, which may put the load further away from the rear axle, this max. weight becomes less.
Hope it helps.
Regards, Rob.
- Tue May 13, 2014 11:22 pm
- Forum: Fordson Dexta
- Topic: Dexta single clutch, tractor won't go into gear
- Replies: 5
- Views: 9380
Re: Dexta single clutch, tractor won't go into gear
Umm yes it is possible that the clutch will not release enough when the "bolts" or the release bearing are worn.
If your clutch seems free of oil, that's the first thing i would check.
If your clutch seems free of oil, that's the first thing i would check.
- Mon May 12, 2014 3:01 pm
- Forum: Fordson Dexta
- Topic: Dexta single clutch, tractor won't go into gear
- Replies: 5
- Views: 9380
Re: Dexta single clutch, tractor won't go into gear
Hi Pat, i see a lot of black stuff in your clutch-housing. And you state you will need to replace some seals. I suspect you have a sticking clutch-plate. I had one once, and took off the entire clutch, pressure plate and all. I put it in a big plastic bin and added a gallon of "cold-degreaser". Let ...
- Sat May 10, 2014 4:43 pm
- Forum: Fordson Dexta
- Topic: Help wiring up new solenoid
- Replies: 3
- Views: 5280
Re: Help wiring up new solenoid
Hi Winchester, I think this solenoid is grounded by the casing. So you don't need a ground wire to the "-" of the battery. To test this (this test is meant for a tractor that has a negative ground), bolt the solenoid to the tractor, but no wires yet. Connect the battery to the tractor as usual, but ...
- Fri Mar 02, 2012 7:19 pm
- Forum: Fordson Dexta
- Topic: Gearbox part question
- Replies: 3
- Views: 3648
Re: Gearbox part question
Yorkshiredextaman, i may be able to help you. Last year i took a gearbox apart, for the shifterrails. I think i have the washer you need, i took a photo. I can send you the photo by email, for identification, if the washer is the right one, you can have it. Better to put it in your Dexta than let it...
- Sun Nov 07, 2010 11:53 am
- Forum: Fordson Dexta
- Topic: cylinder head water outlet connection
- Replies: 1
- Views: 2390
- Sat Oct 30, 2010 2:12 pm
- Forum: Fordson Dexta
- Topic: Done anything to the Dexta this week then ?
- Replies: 39
- Views: 40290
Finished the neighbours Dexta today. He delivered it about a month ago with a sticky clutch. It's got a double clutch - live drive - and it had been leaking engine oil into the bellhousing. I've known this tractor for years,also knew the previous owner. About a year ago it came to me with so much sa...
- Wed Oct 27, 2010 6:16 am
- Forum: Fordson Dexta
- Topic: combustion chamber cap plug washer
- Replies: 4
- Views: 4568
This guy in the Netherlands sells them. http://www.histoparts.com/content/index.php?page=webshop If you need my assistance ordering them or something just yell. Partnumber FD8058A Category "motordelen". It's called "koperen pakking,voorkamer deksel". Translanslated: Engine parts Copper gasket,precom...
- Mon Oct 25, 2010 9:29 pm
- Forum: Fordson Dexta
- Topic: PTO and Clutch
- Replies: 3
- Views: 3338
Hello Winchester, Please check the rod that is connected between the clutch-pedal and the little lever that operates the clutch-release axle through the bellhousing. If that rod has a clevis with two holes,and it is the original one,then you have the live-drive version,which means you can disconnect...
- Mon Oct 25, 2010 4:55 pm
- Forum: Fordson Dexta
- Topic: need a simms injector pump for a 63 super dexta
- Replies: 8
- Views: 6806
- Sat Oct 23, 2010 11:45 am
- Forum: Fordson Dexta
- Topic: need a simms injector pump for a 63 super dexta
- Replies: 8
- Views: 6806
- Sun Oct 03, 2010 7:45 am
- Forum: Fordson Dexta
- Topic: towing
- Replies: 19
- Views: 15915
- Mon Aug 02, 2010 9:19 am
- Forum: Fordson Dexta
- Topic: Steering box rebuilt - Cant get top race to seat - Help
- Replies: 6
- Views: 6174
Yes,nice description Commander. This is why people keep warning eachother not to drop the balls. During reassembly the idea is to position the center nut,put in the lower race,then the balls,which are now loose on the lower race,so can easily roll down into oblivion,then the upper race,oilseal and m...
- Sun Aug 01, 2010 10:49 pm
- Forum: Fordson Dexta
- Topic: Steering box rebuilt - Cant get top race to seat - Help
- Replies: 6
- Views: 6174
Landowner,to the question "is this making any sense?" i would have to say "not really". Did you manage to put the "top cover" in place? The part that's secured with 6 nuts? Indeed you will see the oil seal through the centre hole,but the bottom bit of the steering wheel will never touch that. This "...
- Mon Jul 12, 2010 6:16 pm
- Forum: Fordson Dexta
- Topic: Starter Motor
- Replies: 12
- Views: 8152
Yep that's the most commonly used word for it. If i would go to a tractor dealer and ask for a solenoid i would probably just get empty stares,asking for a starter relay they will reply "here you go,anything else?" The word "solenoid" is more used in cars, for instance the stepper motor that regulat...
- Sun Jul 11, 2010 2:09 pm
- Forum: Fordson Dexta
- Topic: Starter Motor
- Replies: 12
- Views: 8152