The Fordson Tractor Pages Forum

Okay I will give you a call and head your way sometime. Thanks again
Brett

Thanks Pat that is a good picture and description of how it works I believe I understand how it works now. If I am correct the rams push on the plate on the first tractor and also push on the second tractor which swivels separately from the plate the rams are on? I will try to find the book and maga...

Thank you for the info and pictures every bit helps im hoping someone has close up pictures of the turntable mechanism.

I know this is a little bit off topic but it has to do with Fordson. I'm in the USA and I own an e1a major. I have always been fascinated with the doe dual drive tractors. I work for and ingersoll garden tractor dealer and have been thinking about building a dual drive ingersoll tractor. I have not ...

I don't even have the pushrods in yet the whole assembly seems like it is about 1/16 inch back from the tops of the valve stems. I would load pictures but I don't have a place to load them to. I think it should be alright the way it is it ran before like this. I have disassembled the whole rocker ar...

The cylinder head ports are in line on it.

I am in the process of doing a major rebuild on a 1954 Fordson major. I went to put the rocker arm assembly on and they do not line up with the valves correctly. I looked back at the pictures and it was like this before I started the rebuild. I have a normal rocker arms assembly without the decompre...

the sleeves are the correct sleeves for the single seal type block. I think I have it figured out now I got the last sleeve to go in without breaking the o ring. I was using soap by itself before and I had the sleeves cold. On the last one I did it with the sleeve warm and I used a mix of soap and w...

I have a 54 fordson major with the mark 1 engine. I am in the process of doing a rebuild on it. I just got the block back from the machine shop and when I went to press in the sleeves they are all cutting the seals in the block. Has anyone else experienced this or know why it is doing it?

I called all states ag in black creek they want $850 for a remanufactured block which isn't happening. I did call lakeside they have a uses one that should work they only want $200 so I will go that route.

I am in need of a block or a whole engine for a fordson major it is one of the earlier ones with the 1.25 wrist pins. It has to be a block that can be rebuilt. I went to rebuild mine and it was cracked. Preferably in Wisconsin