Search found 74 matches
- Tue Jan 30, 2018 9:03 pm
- Forum: Fordson Dexta
- Topic: Super dexta hydraulic pump.
- Replies: 1
- Views: 3319
Super dexta hydraulic pump.
Hi guys, when I put a hydraulic gauge on my aux output I’m reading around 500 PSI. Is that telling me my pump is bad. If not how can I test just the pump. Thanks for any help.
- Sun Sep 24, 2017 3:54 am
- Forum: Fordson Dexta
- Topic: Super dexta lift not working correctly
- Replies: 0
- Views: 3371
Super dexta lift not working correctly
Hey guys, I went to do some mower with my rotary cutter and my lift didn't have enough power to lift the cutter. It will lift a lighter implement. i put a hydraulic gauge on the aux port and pulled the asc knob and it reading 600 PSI. I think it should be around 2000 PSI. It did raise a few time but...
- Wed Feb 15, 2017 4:06 pm
- Forum: Fordson Dexta
- Topic: Fan shroud super dexta
- Replies: 5
- Views: 8040
Re: Fan shroud super dexta
Thanks
- Fri Feb 10, 2017 8:06 pm
- Forum: Fordson Dexta
- Topic: Fan shroud super dexta
- Replies: 5
- Views: 8040
Re: Fan shroud super dexta
Thanks for the replies. I noticed on one of the picture that there is a top bracket on the radiator. My tractor was in pieces when I got it and doesn't have brackets on top. I bet if I put some on it it wouldn't hit.
- Fri Feb 10, 2017 2:44 pm
- Forum: Fordson Dexta
- Topic: Fan shroud super dexta
- Replies: 5
- Views: 8040
Fan shroud super dexta
Hey guys. My fan shroud is so badly warped that it hits the blades on and off the whole time it's running. I'm not having a easy time trying to find one. Do I really need it on there? Thanks
- Wed Feb 08, 2017 2:35 pm
- Forum: Fordson Dexta
- Topic: No oil pressure
- Replies: 3
- Views: 5762
Re: No oil pressure
Thanks. The manifold heater does leak a little. I guess leaking a little for a couple months and being at that angle due to a flat could be the issue. At lease I hope that's all it is.
- Wed Feb 08, 2017 5:06 am
- Forum: Fordson Dexta
- Topic: No oil pressure
- Replies: 3
- Views: 5762
Re: No oil pressure
i check the oil and it was very high, so i decided to check the water in the radiator and it was fine. I decided to drain some of the oil and it came out like water. I'm guessing it is diesel. i tried to smell it but it just smelled like burnt oil to me. It has been seating on a flat on the left sid...
- Wed Feb 08, 2017 1:07 am
- Forum: Fordson Dexta
- Topic: No oil pressure
- Replies: 3
- Views: 5762
No oil pressure
Hey guys. I rebuild my super dexta engine last summer because it was blowing oil out of the oil stick and vent tube. I ran it for a couple month fine. It's been sitting for a few month and I decided to go for a ride and I noticed that I didn't have oil pressure and oil is coming out on the dip stick...
- Mon Dec 19, 2016 3:46 pm
- Forum: Fordson Dexta
- Topic: Super decta lift
- Replies: 1
- Views: 2410
Super decta lift
Hey guys. I was trying to lift one side of a log with my super dexta to load on a trailor. And the tractor acted like it was not even trying to lift. My neighbor has a smaller ford tractor and it wouldn't pick it up either but his front end would come off the ground. Does the dexta have enough lift ...
- Fri Oct 07, 2016 3:16 pm
- Forum: Fordson Dexta
- Topic: Super dexta top link
- Replies: 0
- Views: 4458
Super dexta top link
Hey guys, I'm now trying to get my draft control set correct. I can not get them to set like wiki says. I don't know if it's me or the parts are to worn. I guess my first question is the main control spring the large spring on back that has the yoke attached to it? I set my lift lever 1/2 from the t...
- Thu Oct 06, 2016 4:23 pm
- Forum: Fordson Dexta
- Topic: Super dexta fan
- Replies: 1
- Views: 3827
Super dexta fan
Does anybody know where to buy a 4 blade fan for a super dexta?
- Tue Oct 04, 2016 4:06 pm
- Forum: Fordson Dexta
- Topic: Super dexta pto disengaging
- Replies: 3
- Views: 5457
Re: Super dexta pto disengaging
That was it. Thanks
- Tue Oct 04, 2016 1:08 pm
- Forum: Fordson Dexta
- Topic: Hydraulic pump gasket
- Replies: 6
- Views: 9781
Re: Hydraulic pump gasket
Thanks
- Mon Oct 03, 2016 7:44 pm
- Forum: Fordson Dexta
- Topic: Hydraulic pump gasket
- Replies: 6
- Views: 9781
Re: Hydraulic pump gasket
I just found in a book where it says it should pull out after you remove the bolts. But mine is only coming out about a 1/4"
- Mon Oct 03, 2016 7:26 pm
- Forum: Fordson Dexta
- Topic: Hydraulic pump gasket
- Replies: 6
- Views: 9781
Hydraulic pump gasket
Hey, I'm trying to remove my hydraulic pump so I can replace my gasket. I have had it removed before while working on my lift. I had the lift removed that time but I was wondering if I can remove it without taking the top off. I haven't got a clear answer yet from some of the post I have read. From ...
- Wed Sep 28, 2016 1:31 pm
- Forum: Fordson Dexta
- Topic: Super dexta pto disengaging
- Replies: 3
- Views: 5457
Re: Super dexta pto disengaging
Well my gasket on my hydraulic pump busted and shot oil everywhere so I have already drained my oil and am waiting on a replacement gasket,so I don't have to worry about oil leaking out. Thanks
- Tue Sep 27, 2016 9:12 pm
- Forum: Fordson Dexta
- Topic: Super dexta pto disengaging
- Replies: 3
- Views: 5457
Super dexta pto disengaging
Hey guys, I've finally got my rescue project rebuilt and looking new. But I'm still finding small issue. Now I'm finding that when I'm running a bush hog and hit a ant bed or very thick grass my pto will disengage. I have a small amount of forward and back play in my pto shaft. Any ideas on the prob...
- Mon Sep 19, 2016 7:56 pm
- Forum: Fordson Dexta
- Topic: Super Dexta bouncing lift
- Replies: 8
- Views: 11677
Re: Super Dexta bouncing lift
My lever is parrell to the top plate(position). It's bounces with all my implements and the arms leak down soon after the tractor is cut off. My draft control only works if I pull the handle all the way back with my hand and hold it there. I'm sure it's a setup problem but I couldn't get the correct...
- Sun Sep 18, 2016 3:15 am
- Forum: Fordson Dexta
- Topic: Super Dexta bouncing lift
- Replies: 8
- Views: 11677
Re: Super Dexta bouncing lift
USA Mississippi. That would be a really long trip for me.
- Sat Sep 17, 2016 3:16 am
- Forum: Fordson Dexta
- Topic: Super Dexta bouncing lift
- Replies: 8
- Views: 11677
Re: Super Dexta bouncing lift
I saw some control valves on a web site and you have the options of blue,green and orange. What does this mean and how do I know which one I need.
- Fri Sep 16, 2016 4:14 pm
- Forum: Fordson Dexta
- Topic: Super Dexta bouncing lift
- Replies: 8
- Views: 11677
Re: Super Dexta bouncing lift
So do I just replace the valves? Are they hard to find? I looked on Agriline and didn't see them. Thanks
- Fri Sep 16, 2016 5:16 am
- Forum: Fordson Dexta
- Topic: Super Dexta bouncing lift
- Replies: 8
- Views: 11677
Super Dexta bouncing lift
Hi,the lift on my super dexta has some kind of internal oil leak. It bounces when i lift something. i read some of the threads on other post and lifted my lift and pulled out the auxiliary control knob and it stays up. When the control knob is in it leaks down. According to the post i saw it is eith...
- Fri Aug 05, 2016 6:12 pm
- Forum: Fordson Dexta
- Topic: Super dexta rear axle locking nut
- Replies: 2
- Views: 4243
Re: Super dexta rear axle locking nut
I have not tried that but I will. Thanks
- Thu Aug 04, 2016 11:39 pm
- Forum: Fordson Dexta
- Topic: Super dexta rear axle locking nut
- Replies: 2
- Views: 4243
Super dexta rear axle locking nut
Hi, I'm trying to replace my seals in my rear axle. I have pulled the axle and remove the locking nut at the hub. To remove the locking nut I had to break off the top ring of the nut that has the nylon or rubber ring in it. The replacement nuts that I've seen do not have this on top of the nut. Do I...
- Wed May 04, 2016 4:27 pm
- Forum: Fordson Dexta
- Topic: Oil pressure gauge
- Replies: 3
- Views: 6628
Oil pressure gauge
Ok so I rebuild my first engine and everything is working good so far. I put a temporary oil pressure gauge on it to see what the pressure is and my friends said he would leave the gauge on it. My oil light works and I like the original look. My question is, is the light enough or would the gauge to...