The Fordson Tractor Pages Forum

Finally round up all the parts and pieces to start again. I replaced EVERY o-ring in the pump, plus both o-rings on the pipe coming out of the pump. All the parts came from FORD. First the 3 point will pick up a full grown man now, it wouldn't do that before. But it was too cold to get out of the sh...

Decided to disassemble everything, thought maybe I'd see something I had missed before, when I pulled of the hydraulic valve I found some of the gasket maker had covered this hole. https://i.imgur.com/xuTO0Ai.jpg?1 I doubt that it is the cause of my problem but it did stand out. Also what is this? h...

You can see where the gears run, I can feel it with my fingernail. Its not exactly rough but there is a difference
Thanks

I disassembled the original pump I removed earlier. I could find nothing wrong with it. https://i.imgur.com/dIcipx5.jpg?1 https://i.imgur.com/zG1VUXs.jpg?1 https://i.imgur.com/kNmLPBM.jpg?1 Also the diagram on New Holland's part website shows a different pump, looks like a super major pump. Does any...

I havn't looked in either pump, since the pressure stayed the same after I switched them I dismissed that but I'll tear it apart first chance I get
Thanks.

Sorry for the delay, work has kept me away from the shop. As far as the valve I have style A: https://i.imgur.com/urMQlvk.jpg?1 https://i.imgur.com/gjWtVe0l.jpg?1 Here is the top of the differential before I added the aux valve https://i.imgur.com/MgDXDO3l.jpg And the finished product before I insta...

SAE 30. I did clean the filter in the bottom of the differential when I changed the old oil. I have one set of remote hydraulics. I bought a complete unit from a junkyard. I will try and get some pics next time I'm at the farm.

I only have about 7-800lbs on my remotes and I can’t pick up my grader blade with the 3 point hitch. Installed a used hydraulic pump and the pressure remained the same. I have searched the forum and read past posts. The O-rings on the tube between the pump and cover were good. I shimmed the unloadin...

Just bought a Major doing some minor work to make it more usable.

Looking for a source or a part number for the gasket that goes between the rear axle housing and the hydraulic/3pt hitch. Not having any luck so far. I'm in the states if that makes any difference.

TIA.