The Fordson Tractor Pages Forum

the tire size is 18.4 x 30 where can i see what the ratio of this pinion crownwheel is 4.4 or 3.3 ? anybody can tell me ? and henk thanks for the front engine plate , its mounted on this fordson i have changed the sump for an iron cast sump over a few weeks, i hope to start her up, and hope it won't...

hello this was a old topic what i have changed, can anyone tell me if this is a normal super major or an new performance ? and what cronwheel pinion i have ( because i think its a normal super major, and it should have the fast pinion crownwheel ) but its running( only ) 23kilometers ( 14 - 15 miles...

underneath the footplate, you can attach the spring of the clutch pedal

hello here you can see the trotlle set up: http://www.fordsontractorpages.nl/phpbb3/viewtopic.php?p=308 looks like you are missing this part http://i1232.photobucket.com/albums/ff364/fomoco60/KGrHqNo8FYCc5HBQQ6tM4qg60_12.jpg the stop cable is mounted in the panel next to the hi lo lever http://i1232...

if it's leaking between the pullywheel and the pully housing you have to change the seal 64mm x 90mm x 13 mm it;s not a standart size , but is availeble ( i dont know the english size ) losse the big nut, and get the pullywheel off, then change the seal , and at last , mount the pully wheel (and loo...

no, i wanted to replace the steering wheel, but in my case, it woundn;t come lose easily

i hope nevilley has more luck, so he can re-use his steering wheel

what adrian is saying WD40 and time but after a week of soaking it in wd 40, and using a big puller, and a big hammer ,its still wound't move , then i get a bit angry :x , and let the grinder do the work, then it came off :clap: http://i1232.photobucket.com/albums/ff364/fomoco60/fordsonstuurzelf.jpg

here a topic with picture of original bearing puller

http://www.fordsontractorpages.nl/phpbb ... f=9&t=2987

hello i don;t know if you have a hydraulic press ? http://i1232.photobucket.com/albums/ff364/fomoco60/DSC01063.jpg http://s1232.photobucket.com/albums/ff364/fomoco60/?action=view¤t=DSC01064.jpg the outer bearing ring you can get out by using a big puller, and heating the ring http://s1232.phot...

http://www.fordsontractorpages.nl/phpbb ... f=9&t=1612

in this topic , you can see self made alignment tool of arno

hello can anyone give me the date of my fordson super major 6 cilinder code on gearbox P22F 7007F T1 E1ADKN code on rear end P14F T14025 T1 E1AKDN a few questions is this a normal super major, or an super major new performane ? ( because it have white rims ) what gear ratio ( pinion crown wheel ) sh...

thanks pascal

this is what i was searching for

hello henk

thanks for the reply

i will contact pascal for some pictures

and if someone else has picture(s) or info
please let me know

hello last week i bougt a trailer coupling for my fordson\ http://s1232.photobucket.com/albums/ff364/fomoco60/?action=view¤t=trekbeksupermajor.jpg i thougt it would fit nice on the bracket of the rocker, but it isn't does anybody has a picture of, how the trailer coupling orginal, is mounted o...

hello rob

the rockers on the pictures, ar not mine, so i can't help

i,ve search a while too, before i found my one rocker

hello

here picture of two different rockers.

http://s1232.photobucket.com/albums/ff3 ... ocker2.jpg

my question is ?

is the left/above rocker on the picture for a new performance model , and the right/down one, for a super major ?

hello

there are 6 bolt holes in thumb stone to connect the front nose cone

http://s1232.photobucket.com/albums/ff3 ... C00508.jpg

very often the bolts are broken

hello gman

it is possible to take out the upper shaft only

( about a year ago ) i orderd a new sael for it, and if i'm right it's the same seal as the normal pto shaft

http://s1232.photobucket.com/albums/ff3 ... 1119-1.jpg

this is the topic i was searcing for

thanks !!

hello everybody because my rear axle seal was leaking i have orderd a new bearing, and a new seal / retainer, but the problem is, that the retainer does not fit, ( one extra ring see picture ) where can i order a good one, or is the retainer i have cut in 2 pieces not anymore avialble, and is the on...

the size of the seal is 90mm x 64mm x13mm

you can order at www.technirub.nl

http://s1232.photobucket.com/albums/ff3 ... C00516.jpg

http://s1232.photobucket.com/albums/ff3 ... to0149.jpg

hello her e a link

http://www.agrilineproducts.com/partsca ... folds.html

hello

my handbrake seal is a little bit leaking, does anybody knows the size of the handbrake seal ? in mm

i hope someone knows, so i can order one

hello i've found a link the graders where built in silvolde ( netherland ) by the family hendre, for more information look , the understand link http://www.bouwmachineforum.nl/forum/viewtopic.php?f=82&t=15352#p214212 i found also a few more hendre grader picture's http://s1232.photobucket.com/albums...

hello frans

maybe you mean this one ? this one, was seen in raalte 2011 i lookt for more picture's of it, but not found it ( jet )

http://www.scv-oldtimers.nl/Raalte2011/ ... _2241.html