Fordson N

This forum is about the Fordson F, N and E27N Major.
Post Reply
Fordson N
Not Quite Blue Yet
Posts: 4
Joined: Fri Feb 05, 2016 11:04 am

Fordson N

Post by Fordson N »

First Hello to all,
I hope with you some answers to bekommen.Ich have a Fordson N Bj.1938. It starts and runs great, but after a certain time he goes out, and will not start again after cooling.
Is this due to the hot gas? Air and gasoline remains the same.
Have you a few Info`s? Thanks in advance.
Greeting Dirk

SkidRoe
True Blue
Posts: 103
Joined: Wed Sep 17, 2014 7:33 pm
Location: Tetenhall Wood, UK (was Thorndale, Ontario, Canada)

Re: Fordson N

Post by SkidRoe »

You could be experiencing coil break down in the magneto, or a bad condenser. When it does it, check to see if you have spark.

Hope this helps - SR
Fordsons: 22 F, 36 N, 50 E27N, 60 FPM Past: 60 Dexta, 61 SM
Fords: 78 6700 Turbo, 81 TW30, 89 4610 4x4 w/ Frey ldr, 96 7740 SLE 4x4 Past: 72 4000 w/ Allied 660 ldr, 75 5200, 76 9600
Others: MH 30 & 44, Oliver Super 55, Bobcat 440b & 773

Fordson N
Not Quite Blue Yet
Posts: 4
Joined: Fri Feb 05, 2016 11:04 am

Re: Fordson N

Post by Fordson N »

Hi, thanks for the Information.ich will the magneto check
greeting Dirk

fordsonf25
Not Quite Blue Yet
Posts: 32
Joined: Tue Aug 25, 2015 6:08 pm
Location: Hants/UK
Contact:

Re: Fordson N

Post by fordsonf25 »

When it will not start are you able to turn it over by hand? Does it turn smoothly?
My 1925 Fordson Blog http://www.fordsons.co.uk

Fordson N
Not Quite Blue Yet
Posts: 4
Joined: Fri Feb 05, 2016 11:04 am

Re: Fordson N

Post by Fordson N »

Hi, I have checked the magnet. Coil has a winding end, why he goes out after some time. I'll let wind the coil again.
Thanks for your advice.
Greeting Dirk

oehrick
Site Governance Team
Site Governance Team
Posts: 1239
Joined: Wed Jan 29, 2014 2:41 am
Location: Norfolk Broads UK

Re: Fordson N

Post by oehrick »

Well done Dirk - that could cause the problem.

Is the broken wire somewhere that you could solder and then insulate the joint with something like epoxy resin ?

Not a permanent repair but would confirm if this is the only problem.
Best regards
Rick - Bogside on Bure


1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes

Fordson N
Not Quite Blue Yet
Posts: 4
Joined: Fri Feb 05, 2016 11:04 am

Re: Fordson N

Post by Fordson N »

The damage is not watching. The coil should rewound werden.Gruß Dirk

oehrick
Site Governance Team
Site Governance Team
Posts: 1239
Joined: Wed Jan 29, 2014 2:41 am
Location: Norfolk Broads UK

Re: Fordson N

Post by oehrick »

OK Dirk, hope the repair goes well

Rick :)
Best regards
Rick - Bogside on Bure


1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes

Post Reply