Hello all- hopefully someone will be able to assist here! I've lifted the top cover on my 1975 4000 tractor and found a worn cam follower pin that is sending the linkage out of adjustment. (as previously diagnosed by Brian). I realise that this is in the wrong section but reading other posts it seems that the linkage is very similar to the dexta- so.... my question is, can anyone tell me the diameter of the roller that fits over this pin so I can machine a new one and get the old thing back together again? There are literally no remnants of the old roller and the pin has almost worn through itself
Annoyingly I made a new roller for my Super which is now sold and didn't keep a record of the sizes
Many thanks
Andy
Major/ Dexta hydraulics
-
- Not Quite Blue Yet
- Posts: 42
- Joined: Mon Jun 21, 2010 8:27 am
Major/ Dexta hydraulics
Super Major restoration- project #1!