Page 1 of 1

Parts from Agriline Products

Posted: Sat Apr 27, 2013 3:19 pm
by P29044
I am rebuilding an engine on a 53 Major. I have priced parts in many places and I see that Agriline Products seem to be so much cheaper than many places. How does the quality of their parts compare to the other places with the same part for sometimes twice as much? I figured that at least a few members on here have dealt with them...Thanks

Re: Parts from Agriline Products

Posted: Sat Apr 27, 2013 4:53 pm
by fnoller
I have bought a lot of parts from them and it seems to be good quality :D

Re: Parts from Agriline Products

Posted: Sat Apr 27, 2013 6:16 pm
by Bensdexta
Agriline parts are often from the same suppliers as everyone else, so quality is usually the same. But like all repro parts, the customer is quite often the quality control! So Agriline are OK! :wink:

If they don't fit, send them back. A bit more expensive if you're over the pond...

Re: Parts from Agriline Products

Posted: Mon Apr 29, 2013 3:41 am
by P29044
Actually Bensdexta, I can get parts from Agriline ordered AND shipped out of UK right to my door cheaper than from part stores here in the states. That is why I was wondering about the quality.

Re: Parts from Agriline Products

Posted: Mon Apr 29, 2013 9:18 am
by Bensdexta
P29044 wrote:I can get parts from Agriline ordered AND shipped out of UK right to my door cheaper than from part stores here in the states. That is why I was wondering about the quality.
That's good. I was thinking about return postage if any parts turn out to be unsuitable. Also I can imagine there might be delays/hastle for returns arising from UK customs.

If it's an expensive part you need, cylinder head or something, suggest you ask on here if anyone's had one and did it fit etc.

But give them a go, I've had plenty of parts from them - glad to see UK industry exporting! :wink:

Re: Parts from Agriline Products

Posted: Mon Apr 29, 2013 1:00 pm
by Dandy Dave
I have also had good luck with most of the stuff they sell and they ship quick. The repro RPM/ hour drives and gages have been a problem no matter where you get them as they all come from the same manufacture. I have been thinking that the manufacture does not put enough lube in the units as they sieze after just several hundred hours. Dandy Dave.