Hi
On the flywheel, front engine plate and elsewhere, Ford used bolt locking plates or tab washers for locking the bolts.
The Repair Manual tells new bolt locking plates to be used.
What is common practise?
New or reuse?
Are New bolt locking plates available, and if yes, where?
Thanks for any help
Kjetil
Bolt Locking Plates
Re: Bolt Locking Plates
Hi,
I just put the old ones back, to be sure a little loctite won't hurt.
Rgds
I just put the old ones back, to be sure a little loctite won't hurt.
Rgds
Best regards
Emiel
N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964
Emiel
N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964
Re: Bolt Locking Plates
In the UK Agriline appear to do the Dexta tabs but not the Major.
However, in the Netherlands is a company called Histoparts, they do the main bearing locking tabs and the flywheel locking tabs.
histoparts.com
Telephone +(31) 514 58 19 16
However, in the Netherlands is a company called Histoparts, they do the main bearing locking tabs and the flywheel locking tabs.
histoparts.com
Telephone +(31) 514 58 19 16
1946 E27N, 1952 Major Diesel, 1959 Power Major, 1962 Dexta, 1962 Super Dexta, 1963 Super Dexta NP, 1964 Super Major NP, 1965 Super Dexta 3000, 1966 Major 4000, 1967 3000 PF, 1994 5640,plus Basildon built NH.
-
- Site Governance Team
- Posts: 1239
- Joined: Wed Jan 29, 2014 2:41 am
- Location: Norfolk Broads UK
Re: Bolt Locking Plates
They are not difficult to make if your old ones are past use and you cannot find replacements, old desktop computer case steel is ideal for this sort of thing.
Best regards
Rick - Bogside on Bure
1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes
Rick - Bogside on Bure
1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes