Wheel strakes

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
Biovet
Not Quite Blue Yet
Posts: 12
Joined: Tue Mar 12, 2019 9:46 pm
Location: Cirencester, Gloucestershire

Wheel strakes

Post by Biovet »

Evening all,

Iv just been offered a pair of wheel strakes for my super.
My question is do these bolt through the 5 empty holes between the
wheel nuts and the 8 outer rim bolts??
If any one has any pictures that would be awesome

Thanks again guys

mathias1
Site Governance Team
Site Governance Team
Posts: 792
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

Re: Wheel strakes

Post by mathias1 »

As far as I can see, they use the 5 holes in the wheel centre: https://picclick.co.uk/Fordson-Tractor- ... 65874.html
Could make sense, since these holes are also used to bolt the double wheels on.
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch

Biovet
Not Quite Blue Yet
Posts: 12
Joined: Tue Mar 12, 2019 9:46 pm
Location: Cirencester, Gloucestershire

Re: Wheel strakes

Post by Biovet »

Ah yes I see what you mean by the ones in the middle!!
Thanks for the pictures, Iv been looking and could only find some from a distance

Hopefully I can upload so pictures of them fitted if there half sensible

Thanks again

shepp
True Blue
Posts: 452
Joined: Thu Oct 06, 2011 8:24 pm
Location: Lancashire

Re: Wheel strakes

Post by shepp »

These are Stanhay "Darville" retractable wheel strakes. They were very useful in the 1950's and 1960's when the weather was wetter even than today (!) and field drainage was not so good. If you are fitting them just for show think carefully - they are very noisy and rattle when running on the road!
1946 E27N, 1952 Major Diesel, 1959 Power Major, 1962 Dexta, 1962 Super Dexta, 1963 Super Dexta NP, 1964 Super Major NP, 1965 Super Dexta 3000, 1966 Major 4000, 1967 3000 PF, 1994 5640,plus Basildon built NH.

Biovet
Not Quite Blue Yet
Posts: 12
Joined: Tue Mar 12, 2019 9:46 pm
Location: Cirencester, Gloucestershire

Re: Wheel strakes

Post by Biovet »

Thanks Shepp,
I’m wanting to put them on for work, we have a few fields that are fairly wet and the access isn’t big enough for the 10Ton fendt so thought I would give the old girl an annual job.
Unfortunately the strakes at the neighbours didn’t fit, they only had 4 mounting points instead of 5.

Thanks again

AdrianNPMajor
True Blue
Posts: 1174
Joined: Sat Aug 13, 2011 6:11 pm

Re: Wheel strakes

Post by AdrianNPMajor »

Strakes were designed to be used on Diesel and Power Majors.
Not wise to fit them to a Super. They are incompatible with a diff lock.
Best, Adrian.

Biovet
Not Quite Blue Yet
Posts: 12
Joined: Tue Mar 12, 2019 9:46 pm
Location: Cirencester, Gloucestershire

Re: Wheel strakes

Post by Biovet »

That’s interesting to know, hasn’t thought about the diff lock.
Thanks for the info, appreciate it

AdrianNPMajor
True Blue
Posts: 1174
Joined: Sat Aug 13, 2011 6:11 pm

Re: Wheel strakes

Post by AdrianNPMajor »

My father was in the REME.
As a boy, I remember driving with him in one of the first Range Rovers. We had returned to the road, and the central diff lock light wouldn't go out. He put one set of wheels on the verge and took to the fields where possible until we got home.
Mann Egerton then came and collected it.
Lesson being, with a diff lock engaged you need wheel slippage to avoid transmitting unbearable forces inboard to the gear train. The weakest link will be equal to the forces, or something will break.
Turns out on the Major that a tooth on the crown wheel, though tough as hell, will be the thing to give up.
Best, Adrian.

Post Reply