Will see if I can obtain the bearing (6202-2RSH), brushes and rivets soon.
generator rebuild
-
mathias1
- Site Governance Team
- Posts: 792
- Joined: Fri Jul 08, 2016 7:11 pm
- Location: Antwerp - Belgium
generator rebuild
Dismantled the generator today. It could use some cleaning on the inside. The bearing was noisy
Will see if I can obtain the bearing (6202-2RSH), brushes and rivets soon.
Will see if I can obtain the bearing (6202-2RSH), brushes and rivets soon.
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch
-
oehrick
- Site Governance Team
- Posts: 1239
- Joined: Wed Jan 29, 2014 2:41 am
- Location: Norfolk Broads UK
Re: generator rebuild
Looks nice and clean Mathius, the com especially - I think the front bearing on mine is on the way out, perhaps it is objecting to being made to generate again after 20 or so years with a dead regulator 
Best regards
Rick - Bogside on Bure
1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes
Rick - Bogside on Bure
1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes