I'm trying to change the generator and oil pressure bulbs, but after removing the silver dash plate I find that there is only enough slack in the wiring harness to extract the holders by about 3/4 inch. From what I can see of the holder, it's not obvious to me how to get the bulbs out. Can anyone shed some light on how the holders open up and if I need to get them out further to change the bulbs?
The bulb holder pulls out of the bottom of the light body. You should see an indent around the bottom which you can prise down with a little screw driver.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian
That will help a lot. I was thinking that it was probably threaded together. Hopefully I can get a small screw driver in there. Are all Dextas that stingy with the wire for the indicators or is it just the petrol ones?
