1958 Dexta - Gear Clearance

Dale B · Post by **Dale B** » Mon Jul 20, 2009 9:57 pm

Hello,
I am rebuilding a '58 Dexta Diesel motor. The Gear Clearance in the manual is from .003 to .006

I have the following between the idler and the following gears.

Fuel Pump .004
Camshaft .011
Crankshaft .011

Is the .011 going to be a problem ? if so are these gears handy to come by? if the Idler and Fuel Pump Clearance is good, I suspect only the Main Crank and Camshaft Gears slightly worn.

jambug123 · Post by **jambug123** » Tue Jul 21, 2009 10:48 am

Agriline products sell all replacement gears for the dexta, if they are worn past the limits in the manual then they need to be replaced.

Regards
James