Lift Arms Removal

This forum is about the Fordson Dexta, Super Dexta and Petrol Dexta.
Post Reply
hiking bear
True Blue
Posts: 67
Joined: Tue Nov 24, 2009 9:55 pm
Location: East Sussex, UK

Lift Arms Removal

Post by hiking bear »

When removing lift arms do they have to be marked in line with the splines before removing or is there a master spline? Also ive undone the retaing bolt and washer and the arms dont want to slide off. Am i missing something or do they need a puller?
1961 Dexta, 1957 FE35 and 1966 Eicher ES101 (of which im always looking for spares).
Top
Mark
True Blue
Posts: 530
Joined: Thu Apr 17, 2008 2:13 am
Location: Eastern Kentucky

Post by Mark »

You'll need a puller, penetrating oil, heat, and a lots and lots of patience.
See ya
Mark

When all else fails, get a bigger hammer
Top
Nisse
Not Quite Blue Yet
Posts: 43
Joined: Sun Jan 10, 2010 10:19 am
Location: Northern Sweden

Post by Nisse »

No need to mark them, there is a master spline. Mine just slipped of with a little hammer banging, so apparently that depends very much on the machine.

Nils
Fordson Super Dexta, John Deere JD400 Backhoe loader
Top
Post Reply

Return to “Fordson Dexta”