Tipping trailer hydrualic

This forum is about the Fordson Dexta, Super Dexta and Petrol Dexta.
Post Reply
damian green
Not Quite Blue Yet
Posts: 20
Joined: Tue Sep 29, 2009 7:58 pm

Tipping trailer hydrualic

Post by damian green »

Hello,
I have dexta with a loader which I would like to add a tipping trailer hydrualic to any thoughts on how I might achieve this?
Many thanks in advance.
Damian
Top
Brian
Grumpy
Grumpy
Posts: 5216
Joined: Wed Apr 16, 2008 2:07 pm
Location: Norfolk, England.

Post by Brian »

It was done with a double Banjo bolt on the auxillary output, then a shut off valve on the loader circuit. I have the same system on my Super and a similar setup on the TE 20.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian
Top
Bensdexta
True Blue
Posts: 2666
Joined: Mon Sep 15, 2008 12:59 pm
Location: N Wales

Post by Bensdexta »

Like this:
Image

The pipe lower left goes to the loader. It can be isolated by the shut-off valve, lower left.

The other pipe on the aux valve goes to the trailer. This can be isolated by disconnecting the trailer and screwing on an end cap :wink:
Bensdexta - 1961 working for a living!
Top
Post Reply

Return to “Fordson Dexta”