Trying to find the part number (or sizes) for the two o-rings (inlet and exhaust oil passages) that set in the counterbores on the top of the rear transmission flange just under the hydraulic cover and gasket. I cannot find them in the parts diagrams. They both are identified in the Service Manual Section 8 page 23 (no part number mentioned) and shown in Fig 39 on that same page.
1964 Super Dexta
Can someone point me to the right location/page in the parts list?
Appreciate any help with this one.
Mike
Super Dexta Hydraulic Cover - O-rings
I see what you mean Mike
The gasket and body is shown on page 30 with the gasket listed on page 31 but, no mention of the O rings.
I you have the old ones then pop down to a local good hardware store or engineering shop as they will be able to match them up.
Or, alternatively, by an O ring kit (this is what I have done) as they are not pricey and very useful to have to hand
The gasket and body is shown on page 30 with the gasket listed on page 31 but, no mention of the O rings.
I you have the old ones then pop down to a local good hardware store or engineering shop as they will be able to match them up.
Or, alternatively, by an O ring kit (this is what I have done) as they are not pricey and very useful to have to hand