what is the bold size of the thrid bolt on the startermotor

dexta61 · Post by **dexta61** » Mon Jun 14, 2010 8:06 pm

I have removed the starter motor to have it checked.
I have removed the two bolts on the front, but at the back side of the starter motor there is a third bold, that was missing. There is a thread in the motor it self and I have tried bolts like an M8 that seems to fit, but seems not to be correct.
Does anybody know what the bold size is of this third bold at the back of the starter motor with the thread in the plate connected to the motor?

Bensdexta · Post by **Bensdexta** » Mon Jun 14, 2010 9:05 pm

I believe the third bolt is 3/8"UNC, 1" long with hex head. It screws into the thread in the adapter plate on the back of the engine.

russelm · Post by **russelm** » Mon Jun 14, 2010 10:15 pm

Just checked my starter and it has no threads in it.

All 3 holes are un-threaded

Mark · Post by **Mark** » Tue Jun 15, 2010 4:22 am

russelm wrote:Just checked my starter and it has no threads in it.

All 3 holes are un-threaded

Your right on dexta 61.

dexta roadless · Post by **dexta roadless** » Tue Jun 15, 2010 2:35 pm

Iknow it is 9/16 head on that bolt so I belive it is 3/8 UNC

john.n · Post by **john.n** » Tue Jun 15, 2010 4:38 pm

its only the adapter plate that is threaded on mine.