AIR BREATHER PLATE

Brendan Mc Caul · Post by **Brendan Mc Caul** » Wed Aug 18, 2010 9:47 pm

Hi everyone!
Looking for some help restoring a super dexta.
The plate that is bolted on the back of the engine for holding the air filter can and throttle linkage there is a s shaped bracket that bolts on behind the air filter to the head the question i have is the air breather pipe from the rocker cover the bracket that holds the pipe is it bolted behind or on top of the s shaped bracket?
If somebody had a picture or the answer that would be great.

Bensdexta · Post by **Bensdexta** » Wed Aug 18, 2010 10:15 pm

Have you seen the parts list downloadable from www.fordson-dexta.de ?
Reference to this might answer your Q, or at least enable others to understand your Q more clearly.
All the best

Brendan Mc Caul · Post by **Brendan Mc Caul** » Wed Aug 18, 2010 10:41 pm

Yes on the parts book page 56 item 62 s shaped bracket bolts on to side of head with 2 bolts one of the bolts also holds the air breather pipe of the rocker cover my question is it behind the bracket or on top.
Thanks again.

Bensdexta · Post by **Bensdexta** » Wed Aug 18, 2010 11:05 pm

Does the photo below help?

It's a standard Dx rather than a Super, but I expect it's the same.
All the best,

Brendan Mc Caul · Post by **Brendan Mc Caul** » Thu Aug 19, 2010 1:46 pm

Thanks
Put the parts book does not show view of right hand side of engine what i need to see.
Will take a picture tonight and upload it to show what i am talking about.

Brendan Mc Caul · Post by **Brendan Mc Caul** » Thu Aug 19, 2010 6:07 pm

Thanks
When i looked at your message the picture did not come up put it is there now and answers my question.
Thanks Again.