Hydraulic pump gasket

This forum is about the Fordson Dexta, Super Dexta and Petrol Dexta.
Post Reply
Bchaney
True Blue
Posts: 74
Joined: Tue Jul 07, 2015 12:07 am

Hydraulic pump gasket

Post by Bchaney »

Hey, I'm trying to remove my hydraulic pump so I can replace my gasket. I have had it removed before while working on my lift. I had the lift removed that time but I was wondering if I can remove it without taking the top off. I haven't got a clear answer yet from some of the post I have read. From what I gather you have to just pull the pto out. Is that correct. And when installing a new gasket do any of you use sealant also or just the gasket. Thanks Brent

Bchaney
True Blue
Posts: 74
Joined: Tue Jul 07, 2015 12:07 am

Re: Hydraulic pump gasket

Post by Bchaney »

I just found in a book where it says it should pull out after you remove the bolts. But mine is only coming out about a 1/4"

Emiel
True Blue
Posts: 729
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: Hydraulic pump gasket

Post by Emiel »

Hi,

Pto shaft has to go out first. The pump is above the shaft.

Rgds
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

Emiel
True Blue
Posts: 729
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: Hydraulic pump gasket

Post by Emiel »

Hi,

I'm wrong with the above. That's for a major. For a Dexta I'm not sure.

Think it should go out, but can't remember how it works with the filters

Rgds
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

Brian
Grumpy
Grumpy
Posts: 5216
Joined: Wed Apr 16, 2008 2:07 pm
Location: Norfolk, England.

Re: Hydraulic pump gasket

Post by Brian »

The intake filter is tight on the "O" ring into the pump. There is nothing else holding it.

Image

Filter is the black bit on the left not the shiny one on the right.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian

Bchaney
True Blue
Posts: 74
Joined: Tue Jul 07, 2015 12:07 am

Re: Hydraulic pump gasket

Post by Bchaney »

Thanks

shawnee
Not Quite Blue Yet
Posts: 49
Joined: Sat Nov 20, 2010 11:44 pm
Location: Georgia

Re: Hydraulic pump gasket

Post by shawnee »

Just replaced mind, the pump will come out with a pry bar, the problem is when you go to replace it, is pushing it in the intake filter, it gives,you need the top off to hold it! I put the thin gasket from agriline, hope not to blow the o ring out.
I used sealant and gasket, and you do not have to pull the PTO out.

Post Reply