Page 1 of 1

Misfire

Posted: Tue Oct 04, 2016 10:36 pm
by shawnee
What would cause a misfire upon startup some times, leaking atomizer valve, injector nozzle leaking fuel into cylinder, it runs for a few seconds burns fuel off, a lot of smoke then runs OK? Any ideas? Broken valve spring? Have not pulled valve cover yet? And that is just sometimes at random! Any :idea:

Re: Misfire

Posted: Wed Oct 05, 2016 9:07 am
by Brian
Injectors or any of the things you mentioned. Also cooler weather will cause it.

Check to see if you have a small tap on the primer line to the manifold heater. This should be turned off until you use the heater and primer.

Re: Misfire

Posted: Wed Oct 05, 2016 1:26 pm
by shawnee
No cut off tap on atomizer valve I think I an going to put one on.

Re: Misfire

Posted: Mon Oct 31, 2016 10:22 pm
by shawnee
It was gummy fuel they do not make it to last as long, high price but :!: cheap made.