Super dexta top link
Super dexta top link
Hey guys, I'm now trying to get my draft control set correct. I can not get them to set like wiki says. I don't know if it's me or the parts are to worn. I guess my first question is the main control spring the large spring on back that has the yoke attached to it? I set my lift lever 1/2 from the top. I don't know if you measure from the metal lip at the top or to the end of its travel about a 1" pass that. I set my draft lever in the down position and put a straight edge on my housing where the gasket goes to the bottom side of the lift arms. I'm I missing something? Also is the yoke and spring that attaches to the top link,that the implement pushes on attached to anything inside the case? I cannot see where if you pushed on it where anything would happen. Thanks Brent