Ford 4610 Hydraulic problem

This forum is about the Ford World Series.

Ford 4610 Hydraulic problem

Postby Gavin » Sun Aug 26, 2018 11:35 am

I am having problems with the hydraulics on my 4610. The lift arms ( also loader and spools) lift very slowly and judder as if there is low oil level (it is full). Not sure what it will lift currently but it will still lift the pickup hitch with a trailer on. The oil filter was changed a few months ago. Not sure if it is pump, relief valve or pick up issues. I have also noticed that the lift arms drop when the tractor is parked up. I have noticed over the last couple of years that the lift capacity of the loader is not as good as it used to be. Does anyone have any suggestions?
Fordson Super Dexta, Ford 4610, and Ford 3000
Gavin
True Blue
 
Posts: 133
Joined: Thu Jul 08, 2010 10:30 am
Location: South Wales

Re: Ford 4610 Hydraulic problem

Postby yijin » Sun Dec 02, 2018 5:53 pm

Henk,
I have the same problem with Westlake.I sent 5 mail's and then they responded. spa Now i am waiting a few weeks for an answer of they have the parts to complete the pm3 plough they have for sale.
Last week i called Mark but he was not available. now i am still waiting
yijin
Not Quite Blue Yet
 
Posts: 1
Joined: Fri Nov 30, 2018 9:18 am

Re: Ford 4610 Hydraulic problem

Postby henk » Sun Dec 02, 2018 7:45 pm

Hello yijin,

Am I right to think you live in Zeeland?
Welcome to the forum. But I think you put your answer in the wrong topic.

I gues we have to be very patience with Mark.
Kind regards, Henk

Fordson New Major February 1957 Mark I
henk
Site Governance Team & Expert Team
Site Governance Team & Expert Team
 
Posts: 1796
Joined: Wed Apr 16, 2008 8:56 pm
Location: Arnemuiden, The Netherlands

Re: Ford 4610 Hydraulic problem

Postby Emiel » Sat Dec 08, 2018 11:36 am

Hi,

Not quite sure how the 4610 hydraulics are in detail, but my first gues would be:
clogged intake screen, clogged filters, engine mounted pumps needs bleeding, or a sticky unload valve.

Maybe this can help you in the right direction http://www.gbfoot.co.uk/downloadfolder/Ford3cylPTO.pdf

rgds
Emiel
Best regards

Emiel

N 1936, E27N 1948, 8N 1948, E27N 1950, E1ADKN 1956, Dexta 1959/60, NH Clayson M103 1964
Emiel
True Blue
 
Posts: 377
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: Ford 4610 Hydraulic problem

Postby Gavin » Tue Dec 18, 2018 11:10 pm

Thanks Emiel.
The pump is transmission mounted and I am led to believe that there is no intake screen and filters have been changed. I have changed the pressure relief valve with no success and have a replacement pump waiting to be fitted but due to moving to a new farm I have not had the time to spend doing further investigation. I do have a full set of the 000 series and 10 series Ford manuals but unfortunately without test equipment and time there help is limited.
Fordson Super Dexta, Ford 4610, and Ford 3000
Gavin
True Blue
 
Posts: 133
Joined: Thu Jul 08, 2010 10:30 am
Location: South Wales


Return to Ford World Series

Who is online

Users browsing this forum: No registered users and 5 guests