removal of fuel sender unit 4610

This forum is about the Ford World Series.
Post Reply
rich2a
True Blue
Posts: 71
Joined: Wed Jun 02, 2010 6:10 pm
Location: west wales
Contact:

removal of fuel sender unit 4610

Post by rich2a »

hi, does anyone know how to remove the sender unit on a 4610 with q / bubble cab?
i have earthed the cable so proved the wiring and gauge, so by elimination the sender unit is most likeley u/s
any tips welcome, ta, rich.
1984 5610 FWD ,1981 ford 4610 ,1962 dexta,1959 power major, 1952 major, 1956 major, 1961 super major.

awemawson
Not Quite Blue Yet
Posts: 20
Joined: Thu Sep 04, 2008 9:41 pm
Location: East Sussex, UK

Re: removal of fuel sender unit 4610

Post by awemawson »

If it's like the 4600 with a Q cab (and I think that it is) remove the instrument panel, and on the right hand side base you'll see a removable circular panel - 4 screws iirc - that lifts up. Under it is the sound deadening felt that has a corresponding disk part punched that removes. Under that is the fuel sender. It's a tight, small hole to work through but supposedly it's possible

Good luck
Sedlescombe
East Sussex

rich2a
True Blue
Posts: 71
Joined: Wed Jun 02, 2010 6:10 pm
Location: west wales
Contact:

Re: removal of fuel sender unit 4610

Post by rich2a »

hi, ta for reply, i found the removable plate, but find it hard to belive sender unit will come out through it!!
1984 5610 FWD ,1981 ford 4610 ,1962 dexta,1959 power major, 1952 major, 1956 major, 1961 super major.

rich2a
True Blue
Posts: 71
Joined: Wed Jun 02, 2010 6:10 pm
Location: west wales
Contact:

Re: removal of fuel sender unit 4610

Post by rich2a »

hi, well sender unit is now out!!
far easier than i thought.
float was missing, and electrically dead!
thanks, rich.
1984 5610 FWD ,1981 ford 4610 ,1962 dexta,1959 power major, 1952 major, 1956 major, 1961 super major.

Post Reply