Posting Pictures

This forum is for discussions about County, Roadless, MuirHill, Northrop, Matbro, ETA and other Ford/Fordson-based conversions.

Posting Pictures

Postby JC » Thu Mar 28, 2013 7:42 am

There always seems to be questions about posting pictures, so here is a short explanation of posting pictures using Photobucket. There are other photo hosting sites, but more people seem to use Photobucket, and its the one I'm most familiar with.
First, you need to have a Photobucket account and you need to be able to upload pictures to it. If you would like to know more about that, let me know and I will add that later.
After you upload a picture, you will need to resize it. If its too big, only part of the picture will show in your post.
Click "Edit" on the menu bar at the top of the page, then click on the picture that you want to edit. Next, click "Resize from the menu above the picture.
Image

Select 800 width. If the lock in the box between width and height is locked, the height will automatically adjust to match the width.
Image
Click "Apply". On the next screen, there will be a box that you can tick if you want to replace the original pic with the resized one. If you don't, you will have the same picture in two different sizes in your library. Don't forget to click "Save".

In the drop down menu under Image Links, click on the box next to IMG code.
Image
The box will turn yellow for a second and the word " copied" will appear in it.
Next, open a new tab in your browser and go to the Fordson Tractor Pages bulletin board. Start a new topic or reply to a post, like you normally would. When you get to the place that you want your picture to appear, right click with your mouse, then click "paste".
Image
The code that you copied will appear next to the blinking cursor and that's where your picture will be in your post.
That's all there is to it. It gets easier after you do it a few times.
JC
Site Governance Team & Expert Team
Site Governance Team & Expert Team
 
Posts: 1092
Joined: Thu Apr 17, 2008 3:48 am
Location: Montague Calif. USA

Re: Posting Pictures

Postby mathias1 » Sun Apr 21, 2019 8:08 pm

A quick update on how to post pictures nowadays:

Some people on the board are using http://postimage.org with good results so far.

Here is how it works:
You can make an account on the website, so you can create your own album. This allows you to add or remove pictures when ever you need to. It is possible to use the website without an account, but you won't be able to alter your pictures.

1) chose size 800x600 (15inch monitor)
2) then chose the files you want to upload
3) Copy the code in the "Hotlink for forums" box
4) Paste the code in the message box together with your message.
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
mathias1
Site Governance Team
Site Governance Team
 
Posts: 435
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium


Return to Ford and Fordson Conversions

Who is online

Users browsing this forum: No registered users and 1 guest