Another numpty question, sorry. When I put the front hubs back on after changing the kingpins, I noticed something was not quite right. The hub on 1 side seated right up against the spindle, overlapping the seat with no gap. On the other side it did not quite cover the seat. I put the hubs on the bench with a straight edge across them and they are different lengths.??
I noticed they have different part numbers
957e 1106
957 1103
I must be having a senior moment for I can't find the front hubs in the manual or parts list!
Are they supposed to be different for left and right?
Is 1 worn down?
or is 1 from a different type like the major?
Any advice greatly received.
Many thanks
John
![Image](http://i854.photobucket.com/albums/ab107/johnmcm01/imagejpg1_zps008149cb.jpg)