Fordson Super Major Wheel Nut Size

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
Millwall Paul
Not Quite Blue Yet
Posts: 28
Joined: Wed Apr 20, 2011 11:47 am
Location: Sunny Slough

Fordson Super Major Wheel Nut Size

Post by Millwall Paul »

Gents,

Does anyone know what size spanner / socket I'll need to undo the rear wheel nuts on my super major please? I'm away from the tractor currently and need to get the wheel off to repair a puncture in the tube. Also I need to clean the rim up as it is extremely corroded which has caused the puncture. What paint would be best to paint the inside of the rim with so that it'll be nice a slippery when I put the tyre back on and also to halt any further corrosion of the rim.

Thanks

Paul
Top
mathias1
Site Governance Team
Site Governance Team
Posts: 792
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

Re: Fordson Super Major Wheel Nut Size

Post by mathias1 »

38mm i'm using, should be 1,5 inch ?
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch
Top
Post Reply

Return to “Fordson New Major”