Hydraulic wont work
-
- Site Governance Team & Expert Team
- Posts: 2069
- Joined: Wed Apr 16, 2008 8:56 pm
- Location: Arnemuiden, The Netherlands
- Contact:
Re: Hydraulic wont work
We old members of this forum found out a long time ago, this is the place te be for all Fordson matters.
Keep up the good work.
Kind regards, Henk
Fordson New Major February 1957 Mark I
Fordson New Major February 1957 Mark I
-
- Not Quite Blue Yet
- Posts: 24
- Joined: Sun Dec 04, 2011 6:32 pm
- Location: Canada
Re: Hydraulic wont work
You probably need to remove the piston in the top cover and clean and in stall new piston seals. Make sure the piston bore is good with no corrosion or pitting, also clean and reseal the valve body and make sure the valve is not sticking. I have done a couple of mine with good results
Re: Hydraulic wont work
Hi,
Can someone please tell me what the thread size and type is for the hole in the unloading valve plug. I have a 1962 super major and am having difficulty removing the unloading valve plug. I have tried a 3/8" UNF bolt but it binds after about 1 turn and will damage the thread if I force it.
Any help greatly appreciated.
Thanks,
Michael.
Can someone please tell me what the thread size and type is for the hole in the unloading valve plug. I have a 1962 super major and am having difficulty removing the unloading valve plug. I have tried a 3/8" UNF bolt but it binds after about 1 turn and will damage the thread if I force it.
Any help greatly appreciated.
Thanks,
Michael.
-
- Site Governance Team & Expert Team
- Posts: 2069
- Joined: Wed Apr 16, 2008 8:56 pm
- Location: Arnemuiden, The Netherlands
- Contact:
Re: Hydraulic wont work
Thats almoost cursing in the church on this site.^Space^ wrote:I also own a Harry Ferguson To 20 a To 35 gas and a Massey Ferguson 50 E with loader.
But since you are saving one of the girls, it will be forgiven.
Kind regards, Henk
Fordson New Major February 1957 Mark I
Fordson New Major February 1957 Mark I