Howdy to all Fordson Gurus.
Just got my generator back from the rebiuld shop and was wondering to I have to "flash" it and if so how? They said it was in good shape other then needing a bearing and the brushes were getting short. So got them to put in two bearings and the brushes. Thanks all for your advice.
Generator gone through by rebiuld shop. Do I need to Flash
-
- Not Quite Blue Yet
- Posts: 16
- Joined: Sun May 05, 2019 4:18 pm
- Location: Ft McMurray Alberta Canada (work) Cherryville, British C0lumbia Canada (home)
Generator gone through by rebiuld shop. Do I need to Flash
1964 Super Major 5000 with FEL and Backhoe. Unfortunately no PTO or Three Point Hitch
-
- Site Governance Team
- Posts: 1239
- Joined: Wed Jan 29, 2014 2:41 am
- Location: Norfolk Broads UK
Re: Generator gone through by rebiuld shop. Do I need to Fla
Any shop worth dealing with ought to ensure output is OK by running up on a test rig after replacing bearings and brushes, refit and try it, you can always flash it in situ if needed
Best regards
Rick - Bogside on Bure
1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes
Rick - Bogside on Bure
1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes
-
- Not Quite Blue Yet
- Posts: 16
- Joined: Sun May 05, 2019 4:18 pm
- Location: Ft McMurray Alberta Canada (work) Cherryville, British C0lumbia Canada (home)
Re: Generator gone through by rebiuld shop. Do I need to Fla
Thanks. Good advice.
1964 Super Major 5000 with FEL and Backhoe. Unfortunately no PTO or Three Point Hitch