Had a plastic on my mf65 then bought a metal one.
Agriline primer tap ?? Looks right,? Should be right at the price but i know some of their stuff is poor quality
Search found 447 matches
- Fri Sep 23, 2022 4:30 pm
- Forum: Fordson Dexta
- Topic: Looking for a new or used atomizer
- Replies: 38
- Views: 45586
- Fri Sep 23, 2022 7:45 am
- Forum: Fordson Dexta
- Topic: Looking for a new or used atomizer
- Replies: 38
- Views: 45586
Re: Looking for a new or used atomizer
So if i bought this
https://www.apukonline.com/14435-fuel-t ... fKEALw_wcB
The spindle should fit my primer tap , or worst case i swap whole tap ??
Interesting
https://www.apukonline.com/14435-fuel-t ... fKEALw_wcB
The spindle should fit my primer tap , or worst case i swap whole tap ??
Interesting
- Thu Sep 22, 2022 4:58 pm
- Forum: Fordson Dexta
- Topic: Looking for a new or used atomizer
- Replies: 38
- Views: 45586
Re: Looking for a new or used atomizer
Thumb screw off spindle gone so its a pliers job to isolate, all damp with fuel .
Dont think enough brass to attach new handle??
Dont think enough brass to attach new handle??
- Thu Sep 22, 2022 9:20 am
- Forum: Fordson Dexta
- Topic: Looking for a new or used atomizer
- Replies: 38
- Views: 45586
Re: Looking for a new or used atomizer
Options / advice please My fuel tap ,primer is leaking,damp . I have never needed to use heat on my s/ dexta or indeed use the primer. Lancashire UK Don't think anything leaks from atomizer into sump , turned off I think . Bought a new tap but leaks every were so swapped back to the original with br...
- Tue Nov 17, 2015 11:35 pm
- Forum: Fordson Dexta
- Topic: Dung Spreader for Dexta
- Replies: 6
- Views: 8920
Re: Dung Spreader for Dexta
I THINK but I could well be wrong that dad has talked about rapping the chains up before filling
Big stick with a hook on. ?
Same idea ?
Sounds like the sort of thing a farmer wouldn't bother doing for long in my opinion
Big stick with a hook on. ?
Same idea ?
Sounds like the sort of thing a farmer wouldn't bother doing for long in my opinion
- Tue Nov 17, 2015 3:40 pm
- Forum: Fordson Dexta
- Topic: Lets see - Implements on your Dexta
- Replies: 31
- Views: 41641
Re: Lets see - Implements on your Dexta
here's my arboreater 140 chipper . usually sat on my MF 65 , but the dexta will run it , needs to be 1850 / 1900 rev , hp not the prob its weight . pto angles better on 65 too , but dexta has run it on the last part of my fence campaign while the fergies in the workshop with backend in bits for new ...
- Tue Nov 03, 2015 8:55 am
- Forum: Tools and Implements
- Topic: Power Major Plough
- Replies: 4
- Views: 13170
Re: Power Major Plough
pictures please
- Wed Oct 21, 2015 6:44 pm
- Forum: Fordson Dexta
- Topic: Post Rammer - follow-up
- Replies: 18
- Views: 17187
Re: Post Rammer - follow-up
as an aside
the contractor that put about 600 m of otter fencing around my fishery uses Bryce equipment / knockers
there tracked self-propelled knocker was a very impressive machine , only second job it had been on mega tool .
driving in BIG strainer like it was a tent peg .
the contractor that put about 600 m of otter fencing around my fishery uses Bryce equipment / knockers
there tracked self-propelled knocker was a very impressive machine , only second job it had been on mega tool .
driving in BIG strainer like it was a tent peg .
- Wed Oct 21, 2015 3:43 pm
- Forum: Fordson Dexta
- Topic: Post Rammer - follow-up
- Replies: 18
- Views: 17187
Re: Post Rammer - follow-up
good plan brian , i'll have to suggest this to our lassBrian wrote:.
(Ann put her back out last year swinging the axe when I was sitting in the chair with my feet up ).
- Sun Oct 18, 2015 5:24 pm
- Forum: Fordson Dexta
- Topic: hydraulic control valve
- Replies: 32
- Views: 47498
Re: hydraulic control valve
you remember correctly sir
I quite understand about the pm situation mate
a run a course fishery and the calls emails face book issues is a problem
I quite understand about the pm situation mate
a run a course fishery and the calls emails face book issues is a problem
- Sat Oct 17, 2015 9:19 am
- Forum: Fordson Dexta
- Topic: hydraulic control valve
- Replies: 32
- Views: 47498
Re: hydraulic control valve
is that the o rings brian
I was pestering a nh fitter other month , he was working on my mate huge t7 .200
his first thoughts was internal linkage rather than a leek ?????
is that what you had suggested brian ?
I was pestering a nh fitter other month , he was working on my mate huge t7 .200
his first thoughts was internal linkage rather than a leek ?????
is that what you had suggested brian ?
- Fri Oct 16, 2015 12:21 pm
- Forum: Fordson Dexta
- Topic: hydraulic control valve
- Replies: 32
- Views: 47498
Re: hydraulic control valve
still bobbing
I've ben offered another lift cover looks to be off a earlier dexta , will it fit my super ??
four bolts for quadrant , mine has two .
or a least may enough parts fit to isolate my problem
tia
can we not pm Brian anymore , I hope all is well .
I've ben offered another lift cover looks to be off a earlier dexta , will it fit my super ??
four bolts for quadrant , mine has two .
or a least may enough parts fit to isolate my problem
tia
can we not pm Brian anymore , I hope all is well .
- Mon Oct 12, 2015 9:14 am
- Forum: Fordson Dexta
- Topic: seat for super dexta
- Replies: 17
- Views: 16132
Re: seat for super dexta
i fitted it and then finish ploughing a small field that I try to do each year , with my 3 fr fergie so 33 " a pass .
I think its nicer to drive now .
got here good and warm to as its not been used that much lately .
that's the first time I've had a email notification re. a post
I think its nicer to drive now .
got here good and warm to as its not been used that much lately .
that's the first time I've had a email notification re. a post
- Sun Oct 11, 2015 1:16 pm
- Forum: Fordson Dexta
- Topic: seat for super dexta
- Replies: 17
- Views: 16132
Re: seat for super dexta
finally fitted the new seat
it needed a 6 mm plate under it to clear the tipper pipe
some have commented it looks odd...
I like it , the seat is further back so better for me , makes tractor much nicer , and the springing is good also .
I'm happy with it .
it needed a 6 mm plate under it to clear the tipper pipe
some have commented it looks odd...
I like it , the seat is further back so better for me , makes tractor much nicer , and the springing is good also .
I'm happy with it .
- Tue Aug 11, 2015 1:54 pm
- Forum: The PARTS SWAP forum!
- Topic: breaking super dexta
- Replies: 0
- Views: 3788
breaking super dexta
hi all
anyone breaking a s dexta ?
hydraulic linkage internals required , or complete lift cover ??? what ever works
cheers tom
anyone breaking a s dexta ?
hydraulic linkage internals required , or complete lift cover ??? what ever works
cheers tom
- Sun Nov 02, 2014 11:56 pm
- Forum: Fordson Dexta
- Topic: black smoke and running rough
- Replies: 30
- Views: 28436
Re: black smoke and running rough
Well done sir
Was going to say this month's tractor and machinery has a few articles on engines heads
December's.
Was going to say this month's tractor and machinery has a few articles on engines heads
December's.
- Sat Oct 25, 2014 5:05 pm
- Forum: Fordson Dexta
- Topic: black smoke and running rough
- Replies: 30
- Views: 28436
Re: black smoke and running rough
the valves weren't sealing ?
- Wed Oct 22, 2014 11:22 pm
- Forum: Fordson Dexta
- Topic: Unbelievably tight rear wheel nuts
- Replies: 15
- Views: 14966
Re: Unbelievably tight rear wheel nuts
well done sir
- Tue Oct 21, 2014 8:59 am
- Forum: Fordson Dexta
- Topic: Unbelievably tight rear wheel nuts
- Replies: 15
- Views: 14966
Re: Unbelievably tight rear wheel nuts
might not be good practice ? :oops: :oops: but I'd use heat on one flat from my oxy /propane , then perfect fitting socket , ideally flat drive ( not a loose bi hex only just fits but not quite :roll: ) mine would be 3/4 drive ,breaker bar/ tommy bar 2 - 4 ft scaffold tube set up before the heat so ...
- Fri Oct 17, 2014 4:16 pm
- Forum: Fordson Dexta
- Topic: Trumpet to transmission housing nuts
- Replies: 12
- Views: 11927
Re: Trumpet to transmission housing nuts
A T engineering at brock , nr. Preston are HIGHLY recommended by me , very rare they don't have the nuts/ bolts for me .
do n't think they stock studs tho tbh
01995 640058
they love farmers going in with rusty /stinky crap wanting a new shiny bolt
do n't think they stock studs tho tbh
01995 640058
they love farmers going in with rusty /stinky crap wanting a new shiny bolt
- Fri Oct 17, 2014 4:09 pm
- Forum: Fordson Dexta
- Topic: refitting head
- Replies: 6
- Views: 5719
Re: refitting head
ello not to disagree with above .. only my opinion bit of oil in bores .... fine .. probably a good thing , I would think / hope it will drain thru the rings back into the sump any how so not to worry . prob smoke abit on start up ? if it was me re. gasket , new copper one , I'd use 'hylomar blue ' ...
- Tue Oct 14, 2014 9:12 am
- Forum: Fordson Dexta
- Topic: black smoke and running rough
- Replies: 30
- Views: 28436
Re: black smoke and running rough
hi
my thoughts would be remove the head / have a look
at least its fairly good access on the dexta
good luck
my thoughts would be remove the head / have a look
at least its fairly good access on the dexta
good luck
- Tue Oct 14, 2014 9:07 am
- Forum: Fordson Dexta
- Topic: Hydraulic lift repair pictures
- Replies: 14
- Views: 39004
Re: Hydraulic lift repair pictures
I think the threads UNC from memory , I used 4 long bolts with the hex cut off , then ground a bit of a taper . last time I refit the cover . does make the job a lot easier / safer . think about were u screw the studs / length of stud ,/ depth of hole in the lift cover , if the studs don't stick thr...
- Tue Oct 14, 2014 8:46 am
- Forum: Fordson Dexta
- Topic: One thing leads to Another!
- Replies: 6
- Views: 6455
Re: One thing leads to Another!
bet there was a funny noise when that screw popped out !!!!
- Mon Oct 06, 2014 3:57 pm
- Forum: Tools and Implements
- Topic: TS 59 J
- Replies: 42
- Views: 78426
Re: TS 59 J
glad you got it sorted looks a bit like the pictures in my ransomes booklet , but mines in English . I bought a second hand , left hand disc for west lake in the end , im glad I did I'm happy with it , came with new disc un bearings ok , so should see me out :D I'm gonna make the winder for the cros...