The Fordson Tractor Pages Forum

Power major

I had a stuck lift lever so i decided to start disassembling it to find where it was stuck. Turns out it was just stuck in the linkage area. But when i put it back together it dont want to travel freely in the quadrant. It wont go into the lower half and it will go up but its like its spring loaded ...

You have bleed screws on the top of the filter and on the injection pump that have to be bled, loosening the fuel lines will not allow you to bleed the system. Bet your problem is still air in the system. http://i407.photobucket.com/albums/pp155/Majorman/Tractors/48cfff11-d78a-45e2-ad39-d091778b60e...

Im also having trouble with mine. The lift pump seemed to not be working, when i pressed the lever it didnt do anything, so i got a new lift pump and put it on and it is doing the same thing. The line has a strong stream of fuel when disconnected but its like it just wont pump anything and has no re...

I used a harmonic balance puller with large eye bolts that hung down through the spokes on the steering wheel and run a chain through them and around the center on the wheel and locked tight with a lock link. Pulled it off with ease. If my description is confusing i can try to set it up and take a p...

To my surprise the the aux knob works good. I expected it to be froze being that the knob is missing. I just put a washer and nut on the threads to make it easier to pull. Can anyone tell me how to check the hydraulic fluid level?

So for a single acting hydraulic cylinder thats all I need to do? I dont need a return line?

Jerry, can you post more pictures of your hydraulic setup? Im wanting to do something similar. I would like to see the whole system. (out port, and valve)

http://i1052.photobucket.com/albums/s442/beauwh/4440f42c-83b8-4702-8953-0c5cd1d6da86_zps7035a1c8.jpg I wanting to add a hydraulic outlet to my super dexta so I can use a haybine that has a single acting hydraulic cylinder. This is what Im working with. Im just not sure what needs to be done to make...

Is that a hydraulic line coming out of the plate in the picture? If so is there a return line somewhere. My super dexta has the same top plate as yours with the flow restriction knob. Im wanting to add a hydraulic remote to it so i can pull a haybine. It doesnt matter if it is paired with the 3pt li...

Thanks for the information and the pictures. Im planning on doing the same thing, what parts or kits did you use/buy?

What is the round silver knob also?