The Fordson Tractor Pages Forum

now, I did some tests, and hell yeah...
the outside was connected with the inside... not good.

why do stores sell this kind of shit....
worthless.

now we are looking for some GOOD stuff...
thank you again.

right.

tomorrow I will check the holders with my multi meter.
For now: thank you

Guys, Indeed. Miscommunication. I thought that the outside of the holder needs power, anyway, but negative or positive...?? I didn't understand it.... Normally in electronics i know: outside holder is ground, and the wire in the centre is connected with the the switch or other kind of signals... In ...

I read this topic again ( slowly :oops: )... and i also found this photo on the forum http://i23.photobucket.com/albums/b394/Marks_DTM_Calib/Dexta/DextaLoom2.jpg Peter was right i think, we need insulated holders. One thing I don't understand. When we started to build the whole tractor off, for pain...

If the battery is in the correct Positve Earth/ Ground in your Fordson Major the black wire, and Blue wire will all be on the NEG side of the Battery. Right. So, the the outside of the bulb holders are now negative. Because the oil sender gives a positive signal trough the purple wire, also the dyn...

Do not confuse Negative with Earth/Ground. Earth/ground can be either Positive or Negative depending on the polarity of your battery. If the battery is in the correct Positve Earth/ Ground in your Fordson Major the black wire, and Blue wire will all be on the NEG side of the Battery. The Yellow/Gre...

hi guys, this is how the situation is right now. http://www.mijnalbum.nl/Foto550-HUEDUIPB.jpg the black/blue wire is always connected with the outside of the lamp holder, so it must be negative. the best solution of the problem is buy some new wires and lamp holders? then I have to call the nearest ...

first to you both, thanks for your answers! @ dandy dave, I know how the oil pressure light works. The problem now is that we have with not running engine, twice positive wires. One from the earth (switch), and another one which is connected to the oudside from the gen light. Gen light works fine (i...

Hi Guys, I'm Maarten from Holland. We are rebuilding a fordson super major. Now we have a problem with te gauges. Our fordson is one with the 2 gauges near the steering wheel. The problem is something with the oil pressure control light, and something with the loading control light. Now, the oil pre...