Search found 729 matches

by Emiel
Fri Feb 02, 2024 7:29 am
Forum: Ford World Series
Topic: Ford 4000 Hydraulics
Replies: 2
Views: 12129

Re: Ford 4000 Hydraulics

Glad you solved it. Congrats
by Emiel
Fri Feb 02, 2024 7:28 am
Forum: Ford World Series
Topic: 1981 Ford 7600 Power plus Diesel pump Problem
Replies: 4
Views: 10879

Re: 1981 Ford 7600 Power plus Diesel pump Problem

Very good to hear you solved it.
by Emiel
Wed Jan 31, 2024 9:49 pm
Forum: Fordson New Major
Topic: Super Major low hydraulic pressure
Replies: 22
Views: 936

Re: Super Major low hydraulic pressure

Looks like a Bareiros with Hanomag dna, isn’t it?
by Emiel
Sat Jan 27, 2024 7:35 am
Forum: Fordson New Major
Topic: petrol / kero
Replies: 48
Views: 28178

Re: petrol / kero

Sounds good your story. Look forward to a video.

I would not put a tacho on the tractor in your case. Keep it original and you’ve a nice story to tell why it’s impossible.
by Emiel
Mon Jan 15, 2024 11:37 am
Forum: Fordson New Major
Topic: quick question fuel return line
Replies: 5
Views: 408

Re: quick question fuel return line

Hi,

You need washers. New copper or aluminum. Diesel leakage kills your engine.

Rgds emiel.
by Emiel
Sun Jan 14, 2024 5:57 pm
Forum: Fordson Dexta
Topic: Hydraulic lift slowly drops
Replies: 4
Views: 301

Re: Hydraulic lift slowly drops

If you replace o rings I would recommend to get proper ones from a cnh dealer. Cheap ones usually don’t have the right shore values and will not seal on the long term.
by Emiel
Fri Jan 12, 2024 9:08 pm
Forum: Ford World Series
Topic: porous block or head gasket
Replies: 5
Views: 485

Re: porous block or head gasket

Hi John,

Interesting what you say about the coolant. What harm will oat do except in one’s wallet?
by Emiel
Thu Jan 11, 2024 10:08 am
Forum: Fordson New Major
Topic: regrinding valve stem caps
Replies: 10
Views: 532

Re: regrinding valve stem caps

Hi Sjors,


Do you mean the rotator caps to get the correct clearance again there ?
by Emiel
Wed Jan 10, 2024 8:55 pm
Forum: Fordson New Major
Topic: Our '53 FMD
Replies: 18
Views: 3274

Re: Our '53 FMD

Image
by Emiel
Wed Jan 10, 2024 8:52 pm
Forum: Fordson New Major
Topic: Our '53 FMD
Replies: 18
Views: 3274

Re: Our '53 FMD

Hi, Engine completely torn down and the block is cleaned. I found E1ADDN part no's in the main and big end shells and together with the Ford stamps and part no on the distribution gasket it is quite sure the engine has been opened somewhere in (I think) the sixties. Strange enough the old type pisto...
by Emiel
Wed Jan 03, 2024 12:14 pm
Forum: Fordson New Major
Topic: Gearbox refill setups!!
Replies: 9
Views: 1528

Re: Gearbox refill setups!!

Pto box is a common leak area and removing it gives a good opportunity to check the bearings and clean things out while you’re there. Don’t Forget to check the bearings in the pto box. These are the most vulnerable ones in the gearbox because all water and dirt collects at the deepest part. The gear...
by Emiel
Tue Jan 02, 2024 11:35 am
Forum: Fordson New Major
Topic: engine/transmission dowel pin question
Replies: 17
Views: 791

Re: engine/transmission dowel pin question

Hi,

I switch to Dutch briefly. Met spigot bedoel ik het randje op de bus. Die moet je inderdaad niet meten maar de kraag van de bus.

Better to over think and do it right once then do it again.

Have you rotated the liners and measured again? I found that rotating gives other measurements.
by Emiel
Tue Jan 02, 2024 9:32 am
Forum: Fordson New Major
Topic: engine/transmission dowel pin question
Replies: 17
Views: 791

Re: engine/transmission dowel pin question

Hi Sandy, as protrusion should be 0,05 to 0,10 mm, would I have to taken action if this is exeed by 0,02 or so? I think you should read this with the accuracy which is achievable with the tools and method given in the manual. Then this 0,02 mm would be within tolerance I think. Do you measure the f...
by Emiel
Mon Jan 01, 2024 12:26 pm
Forum: Fordson New Major
Topic: Our '53 FMD
Replies: 18
Views: 3274

Re: Our '53 FMD

looks like that engine was overhauled by Ford after Fordson production. Hi Sandy, you make me curious. Why do you think that? Based upon the ford logos printed on the gasket? The part no E1ADDN-6K000C seems to be right according to a parts list on this site, but the info is a bit confusing. It at l...
by Emiel
Sun Dec 31, 2023 3:23 pm
Forum: Fordson New Major
Topic: winter project
Replies: 5
Views: 414

Re: winter project

Nice machine.
by Emiel
Sun Dec 31, 2023 12:36 pm
Forum: Fordson New Major
Topic: Our '53 FMD
Replies: 18
Views: 3274

Re: Our '53 FMD

Hi, Some pictures out of the workshop: https://lh3.googleusercontent.com/pw/ABLVV87dwe2OWh0g5QaEF40AAM1gf-G8Buvl1rfwEo0-CtLVGyv81h6fd7fKKdewZD0VsMbMdRmFKKsJbGGJCbCUQ1GrrvAnLPe6jBeTqRHfINE53ONhoHuLI5E6lXqYRcUeAS68zvG43yaJcgWwNphASC65QQ=w536-h953-s-no-gm?authuser=0 https://lh3.googleusercontent.com/pw...
by Emiel
Fri Dec 29, 2023 11:02 pm
Forum: Fordson New Major
Topic: engine/transmission dowel pin question
Replies: 17
Views: 791

Re: engine/transmission dowel pin question

Imho it doesn’t make sense to hss as be dowels in different lengths when the differences are only about a mm. I think dirt or rust between the dowel head and the end of the hole is the problem.

Remove clean and refit would be my first step.
by Emiel
Tue Dec 05, 2023 7:13 pm
Forum: Fordson New Major
Topic: 1963 FSM rear wheels scalloped or not
Replies: 14
Views: 3197

Re: 1963 FSM rear wheels scalloped or not

That was a typo. 12.4x36 of course. In my eyes 13.6x36 looks nice.

16.9x30 surely is nice.
by Emiel
Tue Dec 05, 2023 6:15 pm
Forum: Fordson New Major
Topic: 1963 FSM rear wheels scalloped or not
Replies: 14
Views: 3197

Re: 1963 FSM rear wheels scalloped or not

Original was the scalloped wheel centre. But the round one will fit and work good. Only change the track width takes more time. Tire size back then was 11-36, which in modern tires is 12.2x36.
by Emiel
Thu Nov 30, 2023 8:48 am
Forum: Fordson New Major
Topic: 590E engine head problems
Replies: 58
Views: 30667

Re: 590E engine head problems

Hi Sjors, The old pump easily delivers the opening pressure in the begin of the oil gallery. Did comfirm opening pressure and tested with setting that pressure higher. In an engine Pressure is lost further back near the bearings. Oil pressure is not the same throughout the lubrication system. It is ...
by Emiel
Wed Nov 29, 2023 9:29 pm
Forum: Fordson New Major
Topic: 590E engine head problems
Replies: 58
Views: 30667

Re: 590E engine head problems

I don’t know the specified acceptable tolerance on the bearings unfortunately. I do have a story about oil pressure and oil pumps. I once had a false stamped set of bearings. I needed 0,030 but they actually were 0,020. The engine ran perfect with perfect oil pressure when cold. After a short while ...
by Emiel
Tue Nov 21, 2023 10:33 pm
Forum: Fordson New Major
Topic: 590E engine head problems
Replies: 58
Views: 30667

Re: 590E engine head problems

Hi,

Oil pump can be tested for flow according to workshop manual. Did one and was amazed by the volume. Have not seen many fordson pumps but never a worn one.

Rgds
by Emiel
Fri Nov 17, 2023 8:50 pm
Forum: Fordson New Major
Topic: 590E engine head problems
Replies: 58
Views: 30667

Re: 590E engine head problems

Sjors, my message was indeed trust ford bolt quality and trust loc tite for locking.
by Emiel
Thu Nov 16, 2023 8:35 pm
Forum: Fordson New Major
Topic: 590E engine head problems
Replies: 58
Views: 30667

Re: 590E engine head problems

Did a fmd engine rebuild 2 years ago and had those new con rod bolts and nuts. They’re self locking but didn’t seem to be very useful. We then opted for refitting the old ones with a little drop of thread locking agent. Tractor runs in pulling and it works.
by Emiel
Sat Nov 11, 2023 7:10 pm
Forum: Fordson New Major
Topic: 590E engine head problems
Replies: 58
Views: 30667

Re: 590E engine head problems

If you don’t find evidence of leakage on the head gasket and you’re sure it was combustion gas causing bubbles I’d start looking for a crack in the head. Pressure testing the head is an option to find any issues. An engine shop should be able to support you if you can’t find anything yourself. Posti...