Search found 1207 matches
- Fri Dec 25, 2020 1:00 am
- Forum: Fordson Dexta
- Topic: Merry Xmas!
- Replies: 3
- Views: 2748
Re: Merry Xmas!
I'll second that from sleeting -on- the Boglands
- Tue Dec 22, 2020 8:04 pm
- Forum: Fordson New Major
- Topic: Lorry rescue
- Replies: 3
- Views: 2743
Re: Lorry rescue
Nice work Sandy (and Billy) No lorries this year but mine has taken a couple of bogged cars from a point in an unsurfaced lane by us try to reverse off to turn round without realising what a quagmire it is :) After the gales we had at different times 3 large oak limbs off 3 large oaks obstructing th...
- Wed Dec 16, 2020 8:21 pm
- Forum: Fordson New Major
- Topic: Super major wet clutch?
- Replies: 17
- Views: 7631
Re: Super major wet clutch?
I wondered if the turn of phrase 'wet clutch' might have been the seller forewarning of oil leakage into the bellhousing ? Had the 'drain cock' been in the back end this might have been a site engineers solution to the 'waterfall' seal failing and the back end filling up, drain a pint or two and pou...
- Sun Nov 29, 2020 2:10 pm
- Forum: Fordson Dexta
- Topic: Dexta Register.
- Replies: 68
- Views: 200834
Re: Dexta Register.
Thanks Mathius, at least I was able to get further than before and hopefully stop any more damage from Jerry's timely warning
- Fri Nov 27, 2020 7:23 pm
- Forum: Fordson Dexta
- Topic: Dexta Register.
- Replies: 68
- Views: 200834
Re: Dexta Register.
Thanks Jerry I've had no experience with the admin side and find while I'm able to exclude the user I'm unable to delete the post ! I was able to edit it so hopefully that will be OK until one of the owners can tidy up after me ;) Hope you didn't discover the problem the hard way ! Not sure if this ...
- Tue Nov 17, 2020 1:22 pm
- Forum: Fordson New Major
- Topic: FPM oil from crankcase breather; coolant pouring out
- Replies: 16
- Views: 7178
Re: FPM oil from crankcase breather; coolant pouring out
As is often the case with the Occam's razor approach, the 'What has changed to cause this' may well be some random, unconnected factor. Water leak - you need to trace where first which should lead to why. Oil breathing - the crankcase scavenging pipe aids by removing the evidence but doesn't diagnos...
- Tue Nov 17, 2020 3:20 am
- Forum: Fordson New Major
- Topic: FPM oil from crankcase breather; coolant pouring out
- Replies: 16
- Views: 7178
Re: FPM oil from crankcase breather; coolant pouring out
Couldn't agree more Sandy, that's why I explained that crank case pressurisation is causing this and the vital part played by having a clean breather pipe between Rocker cover and air intake so that the partial vacuum there can scavenge this and prevent or reduce what would otherwise exit via the br...
- Mon Nov 16, 2020 6:43 pm
- Forum: Fordson New Major
- Topic: FPM oil from crankcase breather; coolant pouring out
- Replies: 16
- Views: 7178
Re: FPM oil from crankcase breather; coolant pouring out
Bottom line, if oil is exiting the crankcase breather in volume you have excess pressure in the crankcase / rocker box which the breather pipe is designed to suck out into the air intake, if it is oil rather than oily 'mayonnaise' emulsion then little chance of coolant getting into the lubrication s...
- Mon Nov 16, 2020 1:44 pm
- Forum: Fordson New Major
- Topic: FPM oil from crankcase breather; coolant pouring out
- Replies: 16
- Views: 7178
Re: FPM oil from crankcase breather; coolant pouring out
Oil and particularly emulsion sludge from the breather generally indicates positive pressure in the crankcase, usual cause for this is the small pipe between air cleaner and rocker cover becoming restricted or blocked, give this a good clearout (use a wire, just blowing air through will not last lon...
- Tue Sep 15, 2020 1:40 am
- Forum: Fordson Dexta
- Topic: Thread stripped on fuel bleeder
- Replies: 11
- Views: 7220
Re: Thread stripped on fuel bleeder
Only just noticed this Brian, to avoid having to use too much torque on the bolt, heat the copper washer to red heat, hold it there for 10 seconds or so then drop into cold water, this will anneal i.e. soften it so it will conform and seal with less torque, always good practice if re using Cu washer...
- Wed Sep 09, 2020 8:28 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
Thanks for all your assistance Emiel from myself and Farmer David Today's expedition with a variety of what 'might' be the wiring diagram concentrated on the broken wires from the battery sensor, with the aid of a bulb on a flexi and mirror on an old telescopic radio aerial I eventually found where ...
- Fri Sep 04, 2020 2:26 pm
- Forum: Fordson New Major
- Topic: New user, new project
- Replies: 42
- Views: 18391
Re: New user, new project
Hi and welcome to the forum Dave's concern was not the absence of wheel but the stack of building blocks supporting the weight, if you have not actually seen a stack of these under minimal load suddenly disintegrate without warning you will not appreciate the warning - timber or steel is safer :) Yo...
- Thu Sep 03, 2020 7:50 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
Hmmmn, in England if something is said or written in a complicated manner it is known as 'Double Dutch' For some reason my last post appears to have been written in 'Double English' by the appearance of it twice !! Working all over Europe, as I was taught elementary French in school I was able to co...
- Thu Sep 03, 2020 12:49 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
I'm sorry, I did mean Dutch but you know what the brain is like late at night
- Thu Sep 03, 2020 12:48 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
I'm sorry, I did mean Dutch but you know what the brain is like late at night
- Wed Sep 02, 2020 6:49 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
Down to the farm yet again but with a crowbar and head torch, lifting the battery showed a circular 'thing' in a hole in the tray, ferretting about underneath this is clearly the often mentioned sensor, complete the broken remains of two wires, not easy to see but it looks like they entered the loom...
- Sun Aug 30, 2020 2:11 pm
- Forum: Fordson New Major
- Topic: Fordson Super Major
- Replies: 5
- Views: 11169
Re: Fordson Super Major
Dynamo field coils is a likely candidate, especially if ignition switch / and / or regulator relay have welded contacts.
Easily checked, take the small wire off the back of the dynamo.....
Easily checked, take the small wire off the back of the dynamo.....
- Sun Aug 30, 2020 2:08 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
Thanks Emiel, I am going to have another look for a battery sensor as several things I have read hint at this being a regular problem - need to have the battery right out of tray, the loader may have got in the way, the info on trying a 200 ish ohm resistor as a substitute is the only 'get around' I...
- Thu Aug 20, 2020 8:28 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
No separate sensor as far as I can see Emiel
- Thu Aug 20, 2020 12:14 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
That's what I'm trying to do Emiel, I can't see any sign of a separate sensing module and am fairly sure there is a broken or poor connection, hence wanting a wiring diagram - hoping no one h as done a 'cut & shut' repair in the past
- Wed Aug 19, 2020 9:16 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
Re: ford 4600 charging problem / wiring diag
Hi Emiel
The ignition light does not come on at the 1st key position but I have separately tested the bulb which is OK so discounts that as a problem.
I'm amazed I can find no wiring diagram on the web, perhaps it was not a very popular model ?
The ignition light does not come on at the 1st key position but I have separately tested the bulb which is OK so discounts that as a problem.
I'm amazed I can find no wiring diagram on the web, perhaps it was not a very popular model ?
- Tue Aug 18, 2020 11:45 pm
- Forum: Ford World Series
- Topic: ford 4600 charging problem / wiring diag
- Replies: 16
- Views: 20095
ford 4600 charging problem / wiring diag
Hi Folks, trying to help my neighbour out with a problem on his Ford 4600 about 1976. Has a Lucas alternator with something called battery sensing ? 2 wires in addition to the 'power' plug, one in a socket marked 'S' runs back to a stud on the starter solenoid and appears to be permanently at batter...
- Mon Aug 10, 2020 9:05 pm
- Forum: Fordson New Major
- Topic: Low engine revs
- Replies: 18
- Views: 8466
Re: Low engine revs
I must need different specs !
- Mon Aug 10, 2020 10:50 am
- Forum: Fordson New Major
- Topic: Low engine revs
- Replies: 18
- Views: 8466
Re: Low engine revs
Have I missed something Shepp ? - I started going down the route you have just taken and was told this was a minimec pump ??
- Tue Aug 04, 2020 11:23 am
- Forum: Fordson New Major
- Topic: Low engine revs
- Replies: 18
- Views: 8466
Re: Low engine revs
Read but didn't absorb, thanks for picking that up Hywel