The Fordson Tractor Pages Forum

I inspected the hoses this mourning . One hose was miss positioned and had a tight bend on it . I must have pushed it around knocking over some trees . It is still a little slow but is working like it use to . There are two different diameter hoses on it and I think they need to be rotated . Thanks ...

From what you all are saying is it is most likely a leaking seal , in one or both Rams . As far as the bucket it doesn't drop after the desired up tilt setting is achieved , it's just extremely slow to move loaded or unloaded . The front rams have ben replaced by someone in the tractors past . I nev...

My tilt action is slow on the up tilt motion . The dump action is fine along with raising and lowering the bucket . I'm sure it a stuck valve . I'm cleaning up a drainage ditch and would really like to get this fixed as soon as possible . Does anyone have any images of the control head and parts . I...

Well finally on my forth attempt I removed the inner brake disc . I had soaked the splines with PB blaster when ever I walked by the tractor . I ended up bring my air hammer from work home and it finally broke loose . I used a die grinder and cut the disc almost thru to the splines on the shaft . Th...

It wasn't to bad . I have the outer disc off . There was a lot of cleaning and pre cleaning going on . One bolt for the fender required heat . I did have to remove a upper support bar or link for the backhoe attachment . I read in the manual the adjusting screw is snug then back out 1 1/2 turns . Wi...

Thanks Sandy . I've been dragging my feet on this . I was not looking forward to what I perceived as being a huge PIA job .

It's been almost a year since I have made these repairs . She has been starting Great no starter fluid needed , runs all day . Purrs like a kitten .

I had a look and they are disc brakes . My problem is this tractor has a backhoe attachment . I can remove the outer inspection cover to inspect the brakes . But I don't see any way to remove the brake housing . It doesn't appear to have enough room to slide the housing off of the splines with the b...

I haven't had the need to ask any questions for a year now . The tractor starts and has been running great . Thanks for all the terrific advise . I have a problem with one of the brakes hanging up . I wasn't able to pull the tractor out from the under the barn which is a good thing it 's under cover...

Installed the head 7/4/15 . The machine shop changed out the guides and cut the valves . He told me the valve seats were cupped . I'm a little disappointed in myself didn't see the info on the little O-ring that I should have changed out until I was reading in the manual about the valve clearances ....

It's been a while . I did receive the injectors from Ireland , and installed them a month or so ago . The starter motor from the USA NEW FORD TRACTOR STARTER 2000 2610 2810 3000 3600 3610 4000 5000 5610 6610 7710 . Even with 10 teeth and fitting a newer tractor it works great . It really spins her o...

This is the starter I ended up buying . Ebay title listing ,NEW FORD TRACTOR STARTER 2000 2610 2810 3000 3600 3610 4000 5000 5610 6610 7710 ( 360787370947 ) NEW FORD 5"DIESEL STARTER 12v, 10 tooth drive for a 2000 2110 2300 230A 233 234 250C 256V 2600 260C 2610 276 276V 2810 2910 3000 3310 3430 345C...

I have heard that some people have used a newer model starter on their older Super Majors 1960 era . Has anyone out here used one do have any part numbers for them .

Brain ; " It works through the valve train and, if used to try and start the engine, can cause push rods to jump out of position, bending them and in some cases, breaking rockers and bending valves. I have seen it many many times and would not wish that on anyone . " I can see this happening the pus...

Anthony do you have the part #'s with the letters and numbers for the field coils and armature for the starter . I haven't been able to find them on ebay in the USA . Also I'm having the same problem with the injectors , not finding them in the USA other than one company that wants $125 per rebuilt ...

This a an example of one of the listings I seen on E bay in the USA . D9NN9F593DA Ford / New Holland Fuel Injector 231 335 3600 4600 5110 7700 8730 $ 50 including shipping . Do any of you know the part # similar to this one D9NN9F593DA instead of Part number for the hole injector is 993157 . I spoke...

Thanks Anthony . I have found some of the parts on E bay . I was going to call on Monday before ordering and making sure everything fits . I'll use your numbers and maybe I can order them tonight . I looked for a little but couldn't find any field coils .

As for a super major .I haven't done those type of injectors . As for a diesel injectors disassemble and clean yes . I am a automotive master technician ,there Is not a part on a car I haven't disassembled . As a master G.M. technician I could overhaul 2 to 3 crappy G.M. pumps in a day . As for inje...

The manual I have calls it an excess fuel button . I haven't checked it but will this A.M . Brain any thought on the starter , new or second design after market starters . And the same on the injectors . In your opinion should I just change out the nozzle ends or change out the whole injector . If y...

I ran around this A.M. . Changed out the Battery then then the cables .Finally got it to light up , never been that hard to start before . Ran it around the yard lots of popping and white smoke . So I parked it and pulled the injector lines off and was checking for volume and equal spray from the in...

Yes it sure is .

Brian I knew you are the man . Thanks for the help . I'll be checking it this weekend . It doesn't have the vacuum governor on it , I have run it back up to the shed numerous times with the fresh air intake loose . And I & T service manual I have shows the images for the vacuum governor system and i...

Brain sounds like your the guy that help me with this . I'm an auto technician by trade . I own my repair shop and work by myself since 1998 . I started my factory training at Chevrolet around 1978 Became a master technician in the 80's worked for Toyota master technician there as well . My father g...

I use fuel that's sold at a local gas station . I add Lucas fuel additive , a little Marvelous Mystery oil and a little auto trans fluid to the fuel . I add all this because the new fuels don't have the same lubricating properties that the older fuels had . I also run it with a full to 1/2 full fuel...

Thanks Brain for your input . I'll be running it this weekend and I'm going to try removing the fuel cap when I'm running it . I really thinking it's the injector pump's internal O rings . I put on the original listing that I relined the fuel tank installed a new screen in the tank along with the su...