Search found 182 matches
- Sun Apr 01, 2012 4:51 pm
- Forum: Miscellaneous topics
- Topic: jd 2030
- Replies: 2
- Views: 4058
jd 2030
does anyone have any experience with jd 2030 1975 model, or know for a good forum to discuss problems. It appears to overheat after 2-3hours of use, i have removed rad and flush and cleaned fins, also new thermostat. water pump has some play on pulley, only other i thing i cannot make out is when yo...
- Thu Oct 27, 2011 5:46 pm
- Forum: Miscellaneous topics
- Topic: How to get more grip?
- Replies: 13
- Views: 14985
Re: How to get more grip?
Hi Pascal, good to see her at work at last, my 6 cylinder makes me smile every time i use it. When i cultivate ploughed ground i use 4th or 5th gear not sure if that helps traction but never seem to have to much problem, unless ground is really sticky,and then its normally when cultivator has bunged...
- Mon Sep 26, 2011 9:13 pm
- Forum: Fordson New Major
- Topic: any idea what this is
- Replies: 1
- Views: 2583
any idea what this is
http://www.ebay.co.uk/itm/Fordson-Major ... 25679fdfac
Any idea what the extra bits are on this major, not going to buy it just curious as to what they might be.
Brett
Any idea what the extra bits are on this major, not going to buy it just curious as to what they might be.
Brett
- Tue Sep 20, 2011 7:33 pm
- Forum: Ford and Fordson Conversions
- Topic: pump govenor
- Replies: 1
- Views: 4003
pump govenor
My 6 cylinder major has a 2703 engine i think, it came from a crane originally. The engine has recently got bouncy on tickover and especially when trying to drive at low revs, also when you reverse and hit brakes it nearly stalls. Is this a sign i need to have govenor rebuilt,, i have a old d series...
- Sun Aug 14, 2011 7:32 pm
- Forum: Fordson New Major
- Topic: Introduction and some questions.
- Replies: 34
- Views: 25930
Re: Introduction and some questions.
Hello robbie, Welcome to the world of Fordsons, the rusty brown cable is the stop lever and at the fulcrum of this lever is the small cold start button. I am not sure which way the stop lever should be on this engine, you will have to turn engine over and see if any smoke comes from exhaust, if no s...
- Sun Jun 26, 2011 10:28 am
- Forum: Ford and Fordson Conversions
- Topic: Fordson Oil Filter
- Replies: 12
- Views: 17276
Re: Fordson Oil Filter
i do not know if it is best practice but i have seen one that was turned upside down.
- Fri Apr 29, 2011 7:40 pm
- Forum: Fordson New Major
- Topic: Frame Reinforcement?
- Replies: 6
- Views: 5471
Re: Frame Reinforcement?
i would say it has done over 200 hours like that and there is no play at all, also none of the bolts on rails or engine to gearbox have ever vibrated loose/snapped.
Last week i was pulling a trailer that weighed about 9 tonnes so it does have to put up with some real work also.
Last week i was pulling a trailer that weighed about 9 tonnes so it does have to put up with some real work also.
- Fri Apr 29, 2011 6:04 pm
- Forum: Fordson New Major
- Topic: Frame Reinforcement?
- Replies: 6
- Views: 5471
Re: Frame Reinforcement?
http://i321.photobucket.com/albums/nn37 ... 2major.gif
this is what i have done with my ali sump, it has worked really well.
Brett
this is what i have done with my ali sump, it has worked really well.
Brett
- Wed Apr 27, 2011 8:48 pm
- Forum: Fordson New Major
- Topic: Low oil pressure
- Replies: 7
- Views: 6568
Re: Low oil pressure
just a quick one,did you use any instant gasket when you did sump gasket if so could some have been dragged into oil pump and stopped it working? yes the best way to rebuild engine is to split tractor it will be quicker and easier that way so will save time and money in the long run. hope its not a ...
- Tue Apr 26, 2011 8:35 pm
- Forum: Ford and Fordson Conversions
- Topic: today I was given a County 654
- Replies: 30
- Views: 35059
Re: today I was given a County 654
looking good, i look forward to see her moving under her own power in the not to distant future.
- Tue Apr 26, 2011 8:32 pm
- Forum: Fordson New Major
- Topic: aegerter with majors
- Replies: 5
- Views: 4604
Re: aegerter with majors
no way of telling what ratio you have without taking top cover off and counting teeth on diff, or taking for a test drive. As for clutch and flywheel i have had no problems with mine with a 6 pot in it for last 3 years, that said a single clutch would be better for road work than a live drive clutch...
- Mon Apr 25, 2011 6:59 pm
- Forum: Fordson New Major
- Topic: aegerter with majors
- Replies: 5
- Views: 4604
Re: aegerter with majors
you need to check whether you have a fast or slow diff in the super major as the slow one is only good for 15mph maybe as much as 25mph with a good 6 pot instead of the 4.
good luck with the project i am sure you will learn alot and have fun doing it.
good luck with the project i am sure you will learn alot and have fun doing it.
- Sat Apr 23, 2011 7:48 pm
- Forum: Fordson New Major
- Topic: Low oil pressure
- Replies: 7
- Views: 6568
Re: Low oil pressure
you should see a film of oil on rockers, not gallons, i would remove rocker shaft and clean oilways in the shaft, mine where all blocked before i cleaned it. answer to your other thread if you go to the home page of this website there is lots of manuals/parts list you can download for free. have fun...
- Sat Apr 23, 2011 11:16 am
- Forum: Fordson New Major
- Topic: Low oil pressure
- Replies: 7
- Views: 6568
Re: Low oil pressure
oil pressure gauge sender is bolted into block just under the dynamo, on a super it should be an electric sender to a light on the dash. On my tractor i removed sender and took it to a hydraulic hose shop and they matched the thread of it to a gauge that will then screw direct into block, only cost ...
- Mon Apr 11, 2011 6:12 pm
- Forum: Fordson New Major
- Topic: lack of power
- Replies: 20
- Views: 15138
Re: lack of power
I think i may have found the problem with low power, after driving for 30 mins with timing in correct place the engine died, it turned out the fuel tank filter was blocked solid. That will teach me for believing previous owner, who claimed whole fuel system had recently been drained and cleaned. :cu...
- Sat Apr 09, 2011 4:54 pm
- Forum: Ford and Fordson Conversions
- Topic: today I was given a County 654
- Replies: 30
- Views: 35059
Re: today I was given a County 654
As Far as i am aware county made the forestry changes at the factory, you could order exactly what spec you needed.
Osbournes at romsey hampshire are now the owners of all county rights and have a large range off parts on the shelf,
Osbournes at romsey hampshire are now the owners of all county rights and have a large range off parts on the shelf,
- Fri Apr 08, 2011 7:40 pm
- Forum: Ford and Fordson Conversions
- Topic: today I was given a County 654
- Replies: 30
- Views: 35059
Re: today I was given a County 654
looks like you should do the lottery this week with that sort of luck
- Fri Mar 25, 2011 8:20 pm
- Forum: Fordson New Major
- Topic: lack of power
- Replies: 20
- Views: 15138
Re: lack of power
thanks for all the input guys, timing was out by about 3mm,
i have not had time to do a loaded run yet but it ticks over with less smoke, i am guessing it was over fueling a little before.
i have not had time to do a loaded run yet but it ticks over with less smoke, i am guessing it was over fueling a little before.
- Thu Mar 24, 2011 5:54 pm
- Forum: Fordson New Major
- Topic: lack of power
- Replies: 20
- Views: 15138
Re: lack of power
JC i have followed your instructions for timing, my mark on coupler appears to be 180 degrees out, ie it is at the bottom and marker line is at the top, question is would the engine run if timing was 180 degrees out, or have i done something wrong. i did not want to pull pump off to check it the oth...
- Wed Mar 23, 2011 9:09 pm
- Forum: Ford and Fordson Conversions
- Topic: perkins 540 engine
- Replies: 2
- Views: 7682
Re: perkins 540 engine
i looked at v8s, lots of choice but a good non turbo with 12v electrics is going to be well over £1000.00
there is a guy on ebay who has loads of engines and will make conversion plate aswell.
there is a guy on ebay who has loads of engines and will make conversion plate aswell.
- Wed Mar 23, 2011 7:32 pm
- Forum: Fordson New Major
- Topic: lack of power
- Replies: 20
- Views: 15138
Re: lack of power
http://i321.photobucket.com/albums/nn376/bretthawk/tractorpump010.jpg here is the pump coupling, the fibre spacer and timing adjuster where in place when i bought tractor i just had pump overhauled and replaced it, how do i know if timing is correct, i can see several marks and 3o is stamped on the...
- Tue Mar 22, 2011 7:12 pm
- Forum: Fordson New Major
- Topic: lack of power
- Replies: 20
- Views: 15138
Re: lack of power
i do have a compression tester some where, if anyone knows correct pressure that would be good to know, tractor starts really easily from cold so i would guess compression is ok. this model does have the faster backend ratio so that may affect pulling power some what, my 6 cylinder 100bhp will pull ...
- Tue Mar 22, 2011 3:26 pm
- Forum: Fordson New Major
- Topic: lack of power
- Replies: 20
- Views: 15138
Re: lack of power
i guess i should have said 6th gear, this tractor has the fl head engine, i was expecting it to pull better than a diesel major but it does not. previous owner had it on a log splitter for several years so i was expecting it to be glazed up, or maybe have stuck piston rings. how can i tell if rings ...
- Mon Mar 21, 2011 8:18 pm
- Forum: Fordson New Major
- Topic: lack of power
- Replies: 20
- Views: 15138
lack of power
I purchased a 1964 npsm awhile back with a broken diesel pump, i have now got the pump mended and tractor running, with about 1.5 tonnes on trailer it really struggles to make it up any hill in 3rd high, it puts out loads of black smoke but seems to have no torque at all, it is also breathing heavil...
- Sun Mar 13, 2011 12:09 pm
- Forum: Ford and Fordson Conversions
- Topic: 6 cyl sump
- Replies: 43
- Views: 106265
Re: 6 cyl sump
just thought i would mention that a thames trader sump will not fit on the newer 6cylinder engines from a ford d series or cargo, so you would need to check before any casting took place.