Search found 19 matches

by yelbike
Mon Nov 30, 2009 6:16 am
Forum: Fordson New Major
Topic: Hard starting
Replies: 8
Views: 8096

Hard starting

My 63 super was always great for starting cold or warm, only a few turns then it started immediately. But two weeks ago we had some nice weather so I worked her real hard cutting 2-3 foot long grass with a bulher finishing mower. Now its hard starting, it will crank for 30 seconds before starting. I...
by yelbike
Mon Feb 23, 2009 4:08 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Not Again!!

My tractor has been sitting around for the last two weeks, then today I took it out to clear some snow and its doing the same thing again. It was about -12C this afternoon when it froze or plugged up. Is this going to be a regular occurence? Should I flush it again? I was thinking of using a magneti...
by yelbike
Sat Feb 07, 2009 3:41 am
Forum: Fordson New Major
Topic: battery size
Replies: 3
Views: 4963

My 63 fsm came with two 6 volt batteries connected in series as per the wiring diagram. This just allows more cranking capacity. I now have single 12 volt battery. Is that battery with 690 cca old? It never hurts to go with a bigger battery.
by yelbike
Thu Feb 05, 2009 7:28 pm
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Well I flushed out the drive with Karosene and it came out like milk, I probabbly have to flush it out another time, maybe in the fall. I put in the new fluid everything works great. Is there any way of adjusting the flow rate on the bucket cylinders? Its too slow. The loader cylinders are fine, I'v...
by yelbike
Tue Feb 03, 2009 3:21 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Three questions. Is it a big deal if I use diesel instead of karosene to flush out the hydraulic pump/drive? Karosene seem a little difficult to come by. I was able to remove the drain plug and cover from the diff, I found the screen completely plugged with soft ice/foam "crystals." I think it must ...
by yelbike
Fri Jan 16, 2009 4:52 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Okay so it looks like the weather is supposed to break..... we woke up to -49 this morning but by Sunday the weathers supposed to be at +1C!! :D Brian, you said I should put in two gallons of engine oil along with 5 gallons of karosene in the final drive, then let it run for 30 to 45 minutes. Now do...
by yelbike
Mon Jan 05, 2009 7:41 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

We travelled last summer to San fransisco with the RV, we never needed sleeping bags until we hit the costal 101 hwy, is it ever cool along the coast! I'll keep you in the loop!
by yelbike
Mon Jan 05, 2009 6:29 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Hey JC, I've heard of people doing that with the coals. I thinks its to cold for even that right now, we'll be down near -40 degrees tonight! Doesn't matter if you like Fahrenheit or Celcius at this temperature they both agree that its to damn cold!! :lol: . When I find a warm place for tractor and ...
by yelbike
Sat Jan 03, 2009 7:14 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Okay solved the dipstick issue, installed a new one which is measured and cut to size. Now I can see the condition of the oil, problem is its creamy in color with cristalize ice in it. How do I get the water out? Can the oil be drain and strained/filtered to seperate the water from the oil? How do I...
by yelbike
Mon Dec 29, 2008 3:35 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Thanks for the great info!
Here comes a stupid question :oops: !
When your said to lower the lift arms, you mean the three point?
by yelbike
Sun Dec 28, 2008 6:17 pm
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Image
Can someone help me out with what is circled in red, nothing happens when its moved.
Circle in black I quess is the flow regulator?!
by yelbike
Sun Dec 28, 2008 3:43 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Thanks for the picture and measurements. My dipstick IS missing, I never noticed the small hole, it was covered by snow.

I found the root cause of the lack of oil in my rear axle, leaky rear wheel seal. Summer/ warm weather project!!

Hydraulics are still not working
by yelbike
Sat Dec 27, 2008 7:14 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Ok I thought that was the flow regulator?!
Mines slightly different and is more like a toggle that turns from left to right but will stay at any position in between.
Also I have lever by right side when driving, slightly below my right thigh, What is it for?
How do I get that water out?
by yelbike
Sat Dec 27, 2008 5:44 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

What length is the dipstick? Whats the tolerance from the full to the low mark?
by yelbike
Sat Dec 27, 2008 5:41 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

I did not see the dip stick there, I'll check tomorrow when I got out to the Shark, if its that obvious I'll feel like the dipstick!! :oops: What kind of weight do you recommend, I checked both my shop and owners manual for the weight. Brian wrote about the same oil as the engine, I'm running 15w40,...
by yelbike
Sat Dec 27, 2008 1:52 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

Still can't find the dip stick, your saying it is next to the clutch. The only thing I see is the bung for the transmission(which has level stamps on the side). Brian you said the that ford changed the spec in 1957, but my tractor is a 1963 FSM and it specs a API GL 1 which is a mineral based oil(SA...
by yelbike
Fri Dec 26, 2008 7:49 am
Forum: Fordson New Major
Topic: My Roadless
Replies: 58
Views: 59811

Awesome tractor!!
by yelbike
Fri Dec 26, 2008 5:27 am
Forum: Fordson New Major
Topic: hydraulic problems
Replies: 39
Views: 40551

hydraulic problems

I just purchused my first tractor. Its a 63 super major, I was doing some easy yard work with it and the hydraulic quit all of a sudden(3 pt and loader). Checked fluids and its was pretty dry in the diff, could I have killed the hydraulic pump by running it dry? I added 4.5 gallons of fluid but stil...
by yelbike
Fri Dec 26, 2008 5:12 am
Forum: Fordson New Major
Topic: Breather question
Replies: 4
Views: 8369

What type of oil goes in the breather?