Search found 2065 matches

by henk
Mon Jun 17, 2024 8:57 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

Seems you are a bussy man.
Tanks again for your help.
by henk
Sun Jun 16, 2024 11:32 am
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

There is no grove for the ring seal, so did'nt put them on. When fixing the front seal, do you remove only the nose and radiator or the whole front with the axle? Did it one time that way en the second time just the nose and radiator. That was not easy to get the puley back on. It's going to be a wi...
by henk
Sat Jun 15, 2024 8:48 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

Succes!!!!!!! :D Changed the cup seals and When I started the engine the smoke was less. Let it run for a while and a bit of oil came out. Two day,s later I tested it longer and all seem weel. But of oil. Today had a drive for 10 miles, a day of demo ploghing and 10 miles back. No oil at all. I'm a ...
by henk
Wed May 29, 2024 8:44 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

That was my idea to. Hope I"ll have them at the end of the week.
by henk
Tue May 28, 2024 8:46 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

henk wrote:
Sat May 25, 2024 4:46 pm
Also I see in the parts list that the rocker shaft is mounted on 4 brackets and mine has 5.
Just a thought.
There are 4 different brackets. Left, right, midlle and the other 2 are the same. Could be that one of them was left out of the exploded view to get a better view.
by henk
Tue May 28, 2024 8:39 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

No excuses needed John.
Tractor is running smootly and with power as ever. But checking the injectors is next on my list, together with messuring the compression.
by henk
Mon May 27, 2024 8:40 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

Sandy, The front pulley had a groove in it, but by using a speedy sleeve the surface is ok now. When I do the job, I will remove the whole front axle and nose together with the side beams. Works better to get the timing cover with the oil seal smootly in place. Would the rubber ring be a normal O-Ri...
by henk
Mon May 27, 2024 7:01 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

Mathias, Once I had the head off because of a small gasket leak. That's all I've done on the engine. If the new cup seals do not solve the problem, the head will be the next job. Then I check the liners of course. But I think these ar good. If they leak oil, they also would leak air and there should...
by henk
Sat May 25, 2024 4:46 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

I was looking into the valves seals with the help of the part slist. On the inlet valve there's a seal with number 6571. It looks like a sort of O-ring and is placed under collet and in the bottom of the retainer. There's no seal on the outlet valve. The I&T Shop Service Manual No: FO-12 on paragrap...
by henk
Thu May 23, 2024 9:18 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

To day I changed the oil in HD 20W50. No result with the oil leakage at the front and excaust, altough the spashes ar larger and thicker :cry: The oil pressure is 40 again with a bit of RPM's and staitionairy 35. Next thing to do, I think, will be checking the compression pressure. Or renewing the v...
by henk
Sun May 19, 2024 9:32 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

Hello Mathias, It's Total oil SAE30 without HD. I'm going to change it in HD 20W50 oil and see what happens. Yesterday we had a club event and I taked with a view people about it. The all came up with piston rings and then the valves, but when I mentioned the oil they all say, you could be right. So...
by henk
Thu May 16, 2024 7:45 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

The cranckshaft ventilation is not blocked. So that's not the problem.
The oil could be part of it. It's not a HD version. So the oil could be to thin and at high temp and therefore low on viscosity.
Changing it to 15W40 with HD could maybe help.
by henk
Tue May 14, 2024 7:55 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

Just want to know. When I was looking for the ventilation I notice the screw plug on the right front side in front of the oilfilter and under the houre meter drive. What is the purpes? Just blocing a bore?
by henk
Tue May 14, 2024 6:52 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

The oil is Total Rubia SX30. A minaral oil. So I think it's the right oil. Could 10W/40 modern oil be better, because heated is should be thicker dan the W30 oil
I knew wich pipe you ment. I'll check it. Are there other places to check for the ventilation?
by henk
Tue May 14, 2024 7:57 am
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Re: Cranckcase and oil splashes

Thanks Billy,
I have checkt the oil filler cap. There's no speed change at all when doing the test.
Come to think of it, in the same time when problems started I've bin using other oil. Will look for the specs. I don't think thats the problem, but better check.
I fear there's a lot of work comming.
by henk
Mon May 13, 2024 8:50 pm
Forum: Fordson New Major
Topic: Cranckcase and oil splashes
Replies: 31
Views: 2021

Cranckcase and oil splashes

It's been a long time since I wrote anything on the forum. Only when problems arise are you prompted to write again. What's the problem. About two years ago I noticed black oil splashes on the left side of the engine. I thought that the valves should be adjusted again and the oil changed. Also a new...
by henk
Fri May 26, 2023 6:34 pm
Forum: Fordson F, N and E27N Major
Topic: FFCN E27N parts book
Replies: 3
Views: 5752

Re: FFCN E27N parts book

The fault is in the documents. I've fix it, but can't login. Have had a computer switch and trying to recall all the passwords and setting. Two day"s ago the uplode connection was ok and now it won't connect. Trying to fix it.
by henk
Wed Oct 19, 2022 8:32 pm
Forum: Ford and Fordson Conversions
Topic: kfd conversion
Replies: 6
Views: 7458

Re: kfd conversion

What is the chain driven thing?
A oil pump for the 3p hitch?
Very rare conversion. I think theres only one of it.
by henk
Tue Jun 14, 2022 8:46 pm
Forum: Fordson New Major
Topic: Finally finished!
Replies: 20
Views: 5574

Re: Finally finished!

:clap: :clap:
by henk
Thu Jun 09, 2022 12:54 pm
Forum: Fordson New Major
Topic: axle check chain bracket threads stripped
Replies: 28
Views: 8616

Re: axle check chain bracket threads stripped

Leeroy and John B,

There are many way's to go to Rome as we say.

Pick the one that you like the moost.
by henk
Wed Jun 08, 2022 2:59 pm
Forum: Fordson New Major
Topic: axle check chain bracket threads stripped
Replies: 28
Views: 8616

Re: axle check chain bracket threads stripped

John b wrote:
Tue Jun 07, 2022 11:02 pm
It would have to be drilled out to an even larger diameter to use a helicoil
You Are right John B, therefor the best way would be to make them yourself and use pa M18 Fine thread.
by henk
Tue Jun 07, 2022 9:05 pm
Forum: Fordson New Major
Topic: axle check chain bracket threads stripped
Replies: 28
Views: 8616

Re: axle check chain bracket threads stripped

Lerooy, I would go for the heli coil option, but you must have thread tools and a lathe or know someone who has that. There is a risk if the bigger hole needed for that coil punches trough you will lose oil through it. But with some sealing it can be stopped. The bolt is a UNC 5/8 -11 thread. Drill ...
by henk
Tue May 31, 2022 9:21 pm
Forum: Fordson New Major
Topic: changing clutch
Replies: 17
Views: 7969

Re: changing clutch

:clap:
by henk
Tue May 31, 2022 9:19 pm
Forum: Fordson New Major
Topic: axle check chain bracket threads stripped
Replies: 28
Views: 8616

Re: axle check chain bracket threads stripped

Leeroy, Do you have a picture from the side you are refering to? I understand the picture above is the once turned side that is now the upside. https://www.youtube.com/watch?v=bp31p8jSWaM The video shows how a helicoil works. You can buy a set but thats expensive. You can make one yourself on a lath...
by henk
Sat May 28, 2022 7:00 pm
Forum: Fordson New Major
Topic: axle check chain bracket threads stripped
Replies: 28
Views: 8616

Re: axle check chain bracket threads stripped

Last year, I have don one hole on the upside. Made a bush with inner and outher treaths. Can't remember now what I used for the outside Metric or UNC or BSW. Have not document it with a drawing.
I notice a rather thin castwork around the hole, so be carefull with Helicoile.