The Fordson Tractor Pages Forum

Hi TSG

I am in Putaruru in the south waikato. yea i will post some pics this weekend.

Cheers

When i push the clutch in with my airblast sprayer on, it stops the drive to the pto but it doesnt continue to drive the tractor on when its winding down. It seem to take the drive out between the pto and the gearbox also. Is there any other way of telling other than the clevis?

Thanks

Hi

I have had a good look at the clevis linkage on the bell housing since my last post. And there is only one hole in the linkage. So i guess my dexta is not live drive. Would this be correct?
Thanks
Adam

Hi I seem to have the same problem as Les, My PTO stops first when the clutch is depressed halfway, then the drive stops last. This is a pain when using the hyd. as i have to keep putting the gearbox in neutral to use the hyd. When im not moving, also the pto stops when changing gear. Any ideas anyo...

Hi Jim

I also would be interested in what parts or details you used.

Thanks
Adam

I pulled the top plate and pump off my tractor today. With the pump removed i blocked the outlet port in the pump housing with a 1/4" bspt plug, the port size was perfect to tap a 1/4" bspt thread, this still seals with the o-ring against the diff housing as the plug is below the surface. I also dri...

Thanks for the reply! So if the quadrant lever is placed beyond the top stop this will supply a constant feed from the aux plate. would there be any advantage of tapping into the pump supply line and use a high pressure carry over valve in the valve bank. this way it would get a direct feed form the...

Hi i am a new member. I have a 1962 Super Dexta with a FEL. I would like to replace the trip with a hyd crowd on the FEL also fit a double acting auxillary control bank. Currently the front end loader is controlled by the quadrant lever with a standard aux top plate. How can i get a constant/live hy...