Search found 7 matches
- Thu Nov 10, 2022 3:05 pm
- Forum: Fordson New Major
- Topic: Halfshaft identification and seal help
- Replies: 16
- Views: 2174
Re: Halfshaft identification and seal help
Thank you very much for going to the trouble measuring everything, I will check mine when I’m back with the tractor. Would any year fordson major drive shafts fit? I know the large bull gears are a very slightly different diameter in the later ones but the splines are the same ?
- Mon Nov 07, 2022 8:21 pm
- Forum: Fordson New Major
- Topic: Halfshaft identification and seal help
- Replies: 16
- Views: 2174
Re: Halfshaft identification and seal help
Thanks for your replies that photo is exactly the same as mine with the collar attached to the shaft. Can I ask how you modified the seal to fit as it won’t go far enough onto the shaft to fit about almost 10mm further out to the other side with the standard super major shaft on.
- Sun Nov 06, 2022 7:18 pm
- Forum: Fordson New Major
- Topic: Halfshaft identification and seal help
- Replies: 16
- Views: 2174
Halfshaft identification and seal help
Hi, I’m hoping someone can identify this halfshaft for me, it has a removable collar that the bearing sits against. I’m guessing it could be an industrial? The problem I have is that the new seal and metal retainer it does not sit up the shaft enough compared to the other side. I think I need a diff...
- Sun Nov 06, 2022 4:16 pm
- Forum: Fordson New Major
- Topic: New performance major questions
- Replies: 33
- Views: 6337
Re: New performance major questions
Thank you, I’ve ordered both the main gasket and the gasket kit. Also those 2 bearing numbers where perfect and good value for money.
- Fri Oct 14, 2022 8:22 am
- Forum: Fordson New Major
- Topic: New performance major questions
- Replies: 33
- Views: 6337
Re: New performance major questions
Hi, well I have the gearbox all apart now and inspected. As suggested..thank you, the bearing had failed and the other bearing on the same shaft on its way out. So I’m looking for 2 bearings N-7118-D upper shaft small N-7065-E upper shaft large Does anyone have a generic part number for the bearings...
- Fri Aug 12, 2022 5:10 pm
- Forum: Fordson New Major
- Topic: New performance major questions
- Replies: 33
- Views: 6337
Re: New performance major questions
Hi, thanks very much for all of your really helpful replies. It was really low with oil in the gearbox when I purchased it so will have to split it and do the seals. After topping up with oil and test driving thoroughly again the noise did not make any difference. I’ve since taken the side cover off...
- Mon Aug 08, 2022 7:23 pm
- Forum: Fordson New Major
- Topic: New performance major questions
- Replies: 33
- Views: 6337
New performance major questions
I have a 1964 new performance major I’m restoring and have a couple of questions please. The gearbox drives and sounds lovely apart from top gear 6th at low idle it has an awful chatter rattle grinding noise which goes away once your rev it up more. After doing some research I’m led to believe it co...