The Fordson Tractor Pages Forum

Thx Brian, Thats what I thought just wanted to be sure first (cause sometimes what I thought causes things to go boom..). BTW wouldn't I have to have the Negative terminal to earth anyway to flash it? Thx again, help greatly appreciated, A.B.Ames Yes as far as the dynamo is concerned but you will ha...

Hi all, Sorry to bring up an old post but i wanted to ask/confirm one thing before i do this (below). After flashing F terminal all the wires are put back in place the same as before correct? Thx for any assistance, A.B.Ames You are right, all you need to do is connect the "F" terminal to the output...

Hi Lost in Sweden, Yes, had mine not been drill/tapped already I too would have made up a tee in the upper hose. As for pipe/thread size for the bottom, I'm afraid I don't know the size off hand without tearing it apart. My suggestion would be to pick up a few sizes larger and smaller then return wh...

Here's the setup I have though you have to drill and tap the coolant elbow fitting on the head (wasn't done by me though I used it to add the circulating heater). Edit added: Also my heaters a 1500 watt so I don't have to plug in as long (about 1/2 hour at -30+C so far). Also not sure if you've used...

Nice looking loader on your Super Dexta.But has anyone seen a Dexta with a larger bucket? I guess its used for shifting snow. :wink: Cheers TSG. Hi Swanndri, Thx and yeah that bucket is big (for the tractor), as you can see from the pic it's just extensions added to the small/reg bucket. The origin...

Thx again Brian that worked,
I couldn't find info on it in the manuals (unless I missed it) as I did try looking before asking.

Thx Again,
A.B.Ames

Hi Brian,
Just got back from checking it, it doesn't want to stay in so I guess I've got some research to do to fix it.

Thx,
A.B.Ames

Thx again Brian that should be very helpful.
Take Care,
A.B.Ames

Thx Brian & dexta4 Brian, sadly this girls already been painted at some time for wherever the paint is rubbing off the body i can see a lighter blue paint underneath also yellow pained on the engine (see pump pic) is peeling and shows the blue underneath. Plus isn't the pre mid 63's suppose to have ...

1962 Super Dexta (w/Ford 2000 sticker on sides) S/N 09B720950 Engine K72 (plate w/2 screws), 1607571 stamped, 37111510 raised Clutch K14H Gearbox K16GH (also a 957E 7??5) Hydraulic J31H L-Axle K14H R-Axle K14H (note my axles were marked on the rear side not the front as the ser# post said "the rear ...

Hi All, I purchased a Super Dexta in the fall to get me by (moving snow and such) while I restore my Terra-trac crawler (then the Dexta, then the White 2-60 etc..etc..). I've been reading in the forum and checking videos as much as I can and now have a few questions (to start as surely lots more lat...