Search found 20 matches
- Tue Feb 12, 2019 10:55 pm
- Forum: Tools and Implements
- Topic: ransome ts 80
- Replies: 8
- Views: 14220
Re: ransome ts 80
i have got the turnover linkage working ok now after a bit of work, have got the lift rods sorted on the tractor, the lh arm had no thread left on the adjuster screw so i had to cut it off and weld a new bit in, just need to get the boards cleaned up with flap discs on the small grinder and it shoul...
- Wed Jan 16, 2019 11:25 pm
- Forum: Tools and Implements
- Topic: ransome ts 80
- Replies: 8
- Views: 14220
Re: ransome ts 80
https://postimg.cc/gallery/1sc9zxe28 https://i.postimg.cc/66HNwR7p/plough1.jpg https://i.postimg.cc/vD6Kt4LJ/plough1.jpg https://i.postimg.cc/QHGy4jfH/plough2.jpg https://i.postimg.cc/TKTHxCMx/plough3.jpg https://i.postimg.cc/FYGCH3NL/plough4.jpg https://i.postimg.cc/TL5t0smV/plough5.jpg
- Tue Jan 15, 2019 10:57 pm
- Forum: Tools and Implements
- Topic: ransome ts 80
- Replies: 8
- Views: 14220
Re: ransome ts 80
i have a book for mine its a ts 80 the turnover linkage is slightly different, there is a ratchet pawl in the mechanism this was seized i freed it up but it has made no difference, the connecting rod is starting to bend when you trip the plough, it needs to go over centre but the linkage wont allow,...
- Thu Jan 10, 2019 11:40 pm
- Forum: Tools and Implements
- Topic: ransome ts 80
- Replies: 8
- Views: 14220
Re: ransome ts 80
ok i have a book for it, this is the first reversible plough i have had and it has needed a bit of work, there is a ratchet pawl in the turnover mechanism this was seized, i have got this freed off and will try it again on the tractor, it is an international 584 that i am using this on and it strugg...
- Thu Jan 10, 2019 12:00 am
- Forum: Tools and Implements
- Topic: ransome ts 80
- Replies: 8
- Views: 14220
ransome ts 80
i have a ransomes ts 80 reversible plough that has recently bought, it is in need of restoring, the crossshaft was seized in the headstock, i have freed this up but i cannot get the plough to turnover properly, there is a rod in the turnover mechanism that is bending when i try to turn the plough, t...
- Tue Dec 25, 2012 12:36 am
- Forum: Fordson Dexta
- Topic: LEAKING INJECTOR PUMP
- Replies: 5
- Views: 6100
LEAKING INJECTOR PUMP
HI STARTED DEXTA TODAY AND NOTICED DIESEL LEAKING FROM BOTTOM OF INJECTOR PUMP, THIS HAS NOT HAPPENED BEFORE, THE LIFT PUMP IS DRY AND DOES NOT SEEM TO BE COMING FROM ANY PIPES, I HAVE NEVER HAD ANY FUEL AT LEAK OFF PIPE, IS THIS THE EXCESS FUEL FINDING ITS WAY OUT? ANY HELP APPRECIATED THANKS.
- Sun Jul 15, 2012 12:04 pm
- Forum: Fordson Dexta
- Topic: Grill Fixing
- Replies: 19
- Views: 16265
Re: Grill Fixing
i too had that problem with the clips, i fixed the grill with a small self tapper screw and just used the chrome clips for show
- Sat Jul 14, 2012 1:08 pm
- Forum: Fordson Dexta
- Topic: leak off pipe
- Replies: 2
- Views: 3490
leak off pipe
my injector leak off pipe has no fuel coming out of it, i read on another forum that if no fuel is present at the pipe then the excess fuel will enter the engine via injector and will collect in sump causing wear to crank bearings, is this true?
- Thu Jul 05, 2012 9:21 pm
- Forum: Fordson Dexta
- Topic: turbo
- Replies: 4
- Views: 5589
Re: turbo
hi thanks for the reply, the engine is old and worn out has quite a bit of backpressure, so maybe it wont take much more power,the tractor was saved from the scrapheap so it doesnt really matter if it goes bang, on the old fordson forum there is a post from someone that fitted a turbo to their dexta...
- Thu Jun 28, 2012 10:40 pm
- Forum: Fordson Dexta
- Topic: turbo
- Replies: 4
- Views: 5589
turbo
have seen a massey 35 on youtube with a turbo fitted, anyone carried this out before, have a super dexta that could be converted
- Sun Jun 03, 2012 3:06 pm
- Forum: Fordson Dexta
- Topic: rocker link
- Replies: 1
- Views: 2487
rocker link
can anyone explain what the two different holes on the rocker for the top link are for, ie which one for ploughing and other ground engaging implements
- Sun Apr 22, 2012 3:10 pm
- Forum: Tools and Implements
- Topic: plough setup
- Replies: 3
- Views: 6643
Re: plough setup
have tried inserting pictures but it will not allow me could i have your email address and i will send them to you
- Sat Apr 21, 2012 1:09 pm
- Forum: Tools and Implements
- Topic: plough setup
- Replies: 3
- Views: 6643
plough setup
Hi anyone get advice for seting up a single furrow plough on a dexta, not sure of the make it has a knive cutter instead of a disc, new to ploughing but just want to be able to turn a small plot over to plant spuds any help will be appreciated
- Thu Apr 19, 2012 10:26 pm
- Forum: Fordson Dexta
- Topic: ploughing with dexta
- Replies: 4
- Views: 4406
ploughing with dexta
anyone get any advice on ploughing with the dexta, have bought a single furrow plough for it but hydraulics do no seem to work in draft mode without pushing lever towards axle, can the plough be used in position mode without a depth wheel
- Thu Apr 19, 2012 10:23 pm
- Forum: Fordson Dexta
- Topic: oil in exhaust
- Replies: 8
- Views: 12392
Re: oil in exhaust
starts first time from cold with thermostart plug, is not to smokey but it does spend a bit of time idling, does not seem to be losing any water either
- Sun Apr 15, 2012 1:58 pm
- Forum: Fordson Dexta
- Topic: oil in exhaust
- Replies: 8
- Views: 12392
oil in exhaust
any one know why my dexta has started putting oil out the exhaust bonnet is covered in dots of oil and there is a drip from the hole in the bottom of the exhaust manifold
- Sun Mar 25, 2012 3:52 pm
- Forum: Fordson Dexta
- Topic: BRAKE BACKPLATE
- Replies: 4
- Views: 4511
Re: BRAKE BACKPLATE
WESTERN ISLES SCOTLAND
- Mon Mar 12, 2012 7:33 pm
- Forum: Fordson Dexta
- Topic: BRAKE BACKPLATE
- Replies: 4
- Views: 4511
BRAKE BACKPLATE
I HAVE A SUPER DEXTA THAT NEEDS THE BRAKE BACKPLATES REPLACING AS THEY ARE ROTTEN, DOES ANYONE KNOW WHERE NEW ONES ARE AVALIBLE OR GOOD SECONDHAND ONES, DO THE MF 35 ONES FIT?
- Sun Jan 08, 2012 4:36 pm
- Forum: Ford and Fordson Conversions
- Topic: dexta conversion
- Replies: 1
- Views: 4462
dexta conversion
anyone got any information on how to convert a super dexta to four wheel drive i.e. what axle to use, how to transfer the power to the axle etc
- Sun Jan 08, 2012 4:16 pm
- Forum: Fordson Dexta
- Topic: Throttle linkages
- Replies: 4
- Views: 4386
Re: Throttle linkages
have a look on ebay for kit car throttle linkage its a 7 or 8mm threaded rod with small rod ends i used this and did the job great