Hi, I am refurbishing my Dexta 1960 and want to put a front loader and a Cab on. Has anyone got either or both items or knows where I might get them?
Regards
Search found 122 matches
- Wed Mar 28, 2018 11:33 pm
- Forum: The PARTS SWAP forum!
- Topic: Fordson Dexta Front loader and Cab
- Replies: 1
- Views: 4408
- Tue Aug 13, 2013 10:15 am
- Forum: Fordson Dexta
- Topic: Combined Key and Light Switch
- Replies: 4
- Views: 4924
Re: Combined Key and Light Switch
Thanks Ben, sorry for the delay I've been on Holiday. I managed to sort it all out with a little thought. Thanks again.
- Sun Jul 14, 2013 6:52 pm
- Forum: Fordson Dexta
- Topic: Combined Key and Light Switch
- Replies: 4
- Views: 4924
Re: Combined Key and Light Switch
I am aware of that wiring diagram, I was looking for a wiring diagram that does not include the regulator box and has got an alternator not a dynamo, also with a negative earth.
- Thu Jul 11, 2013 5:11 pm
- Forum: Fordson Dexta
- Topic: Combined Key and Light Switch
- Replies: 4
- Views: 4924
Combined Key and Light Switch
I am about to wire a combined ignition and light switch on my 1960 Dexta. It has an alternator fitted and is negative earth. All the wiring diagrams show seperate switches with a dynamo and regulator box. I am also interesed in the wiring of the oil pressure light and the charging light. Any simple ...
- Tue Jul 02, 2013 4:56 pm
- Forum: Fordson Dexta
- Topic: Charging Light
- Replies: 3
- Views: 3537
Re: Charging Light
Everything is so simple I am beginning to suspect the alternator, it is well over 10 years old, how can I test it? Will the light not come on if the alternator is u/s?
- Tue Jul 02, 2013 3:50 pm
- Forum: Fordson Dexta
- Topic: Charging Light
- Replies: 3
- Views: 3537
Charging Light
I have just rewired my Dexta but I can't seem to get the charging light to come on. The oil pressure light is fine. It isn't a bulb issue I've swapped them over. I have an alternator fitted. It must be something simple but after a lot of hours looking and trying i am stuck. Any ideas?
Regards
Regards
- Tue Jul 02, 2013 3:46 pm
- Forum: Fordson Dexta
- Topic: Temperature Gauge
- Replies: 5
- Views: 5109
Re: Temperature Gauge
Thanks for your reply
- Sun Jun 30, 2013 10:32 pm
- Forum: Fordson Dexta
- Topic: Temperature Gauge
- Replies: 5
- Views: 5109
Temperature Gauge
Hi all,
I am about to replace the temperature gauge on my Dexta. Can anyone tell me what "route" the cable takes from gauge to probe?
Regards
I am about to replace the temperature gauge on my Dexta. Can anyone tell me what "route" the cable takes from gauge to probe?
Regards
- Mon May 09, 2011 8:37 am
- Forum: The PARTS SWAP forum!
- Topic: Bracket
- Replies: 3
- Views: 4556
Re: Bracket
Just to put this one to bed. It is now clear that all the pickup hitches I have bought on E Bay advertised as Dexta are a mixture of different models. The actual hook and attached frame is wrong on them all. I don't think it matters with the hook but the attached frames on my bits are 3" to big so t...
- Sat May 07, 2011 10:19 am
- Forum: The PARTS SWAP forum!
- Topic: Bracket
- Replies: 3
- Views: 4556
Re: Bracket
Yes, after a lot of searching.
- Thu May 05, 2011 5:28 pm
- Forum: The PARTS SWAP forum!
- Topic: Bracket
- Replies: 3
- Views: 4556
Bracket
I am still struggling to get my Automatic Pickup Hitch on my Dexta to fit correctly. The hitch itsef is not vertical so does not fit to the plate correctly so any implement fitted is not secure. I think I need to change the anchor bracket as the one I have fitted does not look like the one in the sp...
- Tue Feb 22, 2011 12:09 am
- Forum: The PARTS SWAP forum!
- Topic: Wanted: Lift arms with the extra hole for hitch pick-up
- Replies: 3
- Views: 5355
Re: Wanted: Lift arms with the extra hole for hitch pick-up
Just to let you know that if you do get some arms from a 2000 then you will have to change the shaft as well as the key on the shaft is different from the Dexta. God knows why!!!!
- Fri Feb 11, 2011 11:30 am
- Forum: The PARTS SWAP forum!
- Topic: Automatic Pick-up hitch
- Replies: 5
- Views: 8654
Re: Automatic Pick-up hitch
This is the part that fits to the rear axle as you can see there are only 2 bolt holes whereas the dexta has 3 holes. The two hole don't line up on the Dexta. I believe that all the other parts, except for the lift arms, are interchangeable, though I may be wrong. I would have posted more pictures b...
- Thu Feb 10, 2011 11:06 pm
- Forum: The PARTS SWAP forum!
- Topic: Automatic Pick-up hitch
- Replies: 5
- Views: 8654
Re: Automatic Pick-up hitch
hi Jerry,
This is an old post, I managed to get the Manifold I wanted, at the moment she is working fine, actually still in hibernation for the winter. I will take some pics of the hitch tomorrow.
Regards
This is an old post, I managed to get the Manifold I wanted, at the moment she is working fine, actually still in hibernation for the winter. I will take some pics of the hitch tomorrow.
Regards
- Wed Feb 09, 2011 1:28 am
- Forum: The PARTS SWAP forum!
- Topic: Automatic Pick-up hitch
- Replies: 5
- Views: 8654
Re: Automatic Pick-up hitch
Sorry for the delay, I'm pretty sure it won't fit a Major, perhaps someone will kow otherwise. If it is of any use let me know and I will post some pics.
Regards
Regards
- Tue Oct 19, 2010 2:34 pm
- Forum: Fordson Dexta
- Topic: Done anything to the Dexta this week then ?
- Replies: 39
- Views: 40531
- Tue Oct 19, 2010 8:12 am
- Forum: Fordson Dexta
- Topic: Done anything to the Dexta this week then ?
- Replies: 39
- Views: 40531
- Mon Oct 18, 2010 11:20 pm
- Forum: Fordson Dexta
- Topic: Done anything to the Dexta this week then ?
- Replies: 39
- Views: 40531
Are we looking at a standard Dexta here, the radiator configuration viz filler pipe and brackets seem to be different from mine, my filler pipe seems lower and the bracket extentions to the cowel are missing. How does the nose cone fit, does it attach to the arms that are held by the two nuts? If yo...
- Fri Oct 15, 2010 5:11 pm
- Forum: Fordson Dexta
- Topic: Aux service valve spool removal?
- Replies: 6
- Views: 5832
- Fri Oct 15, 2010 5:03 pm
- Forum: Fordson Dexta
- Topic: Auxiliary Services
- Replies: 8
- Views: 6340
- Fri Oct 15, 2010 12:27 am
- Forum: Fordson New Major
- Topic: Whats Better - Massey Ferguson or Ford
- Replies: 11
- Views: 20635
- Thu Oct 14, 2010 4:41 pm
- Forum: Fordson Dexta
- Topic: Auxiliary Services
- Replies: 8
- Views: 6340
- Thu Oct 14, 2010 11:17 am
- Forum: Fordson Dexta
- Topic: Auxiliary Services
- Replies: 8
- Views: 6340
Auxiliary Services
Hi again
Should there be a gasket on the auxiliary services cover? Does anyone know where I can buy one? Is the 'Gasket in a tube ' any good in this situation?
I have a slight leak on this cover which is annoying any help appreciated.
Regards
Should there be a gasket on the auxiliary services cover? Does anyone know where I can buy one? Is the 'Gasket in a tube ' any good in this situation?
I have a slight leak on this cover which is annoying any help appreciated.
Regards
- Wed Oct 06, 2010 5:49 pm
- Forum: Fordson Dexta
- Topic: Fitting an Automatic Pick-up Hitch
- Replies: 0
- Views: 2831
Fitting an Automatic Pick-up Hitch
To fit the hitch I have to remove the swinging drawbar. According to the drawing I have the drawbar is made up of : 1. Drawbar anchor bracket 2. Drawbar support bracket 3. Swinging drawbar 4. Drawbar support plate. My question is simple, what do I do with number 4? Do I remove it? At the moment I ha...
- Tue Oct 05, 2010 7:38 pm
- Forum: Miscellaneous topics
- Topic: The Search Function
- Replies: 5
- Views: 4505