Search found 10 matches
- Thu Mar 17, 2016 2:43 am
- Forum: Ford and Fordson Conversions
- Topic: Muir Hill 14 B Dumper with rock body weight
- Replies: 3
- Views: 6686
Re: Muir Hill 14 B Dumper with rock body weight
Frank, Thanks for the offer for transport , I guess that it is about 5-6 tonne ,but I am hoping somebody out there has some specs regarding the weight of the Dumper. My Isuzu can carry 4 tonne & is just a bit light to transport as I have to transport from north of the boarder back to south east of M...
- Sat Mar 12, 2016 11:44 pm
- Forum: Ford and Fordson Conversions
- Topic: Muir Hill 14 B Dumper with rock body weight
- Replies: 3
- Views: 6686
Muir Hill 14 B Dumper with rock body weight
Hi,
Can anybody tell me the weight of a Muir Hill 14B Dumper with a rock body & perkins P6 engine.
I need to transport it and I think it is too heavy for my truck.
I cannot find any information regarding the specs on this item.
Thanks, Willsy.
Can anybody tell me the weight of a Muir Hill 14B Dumper with a rock body & perkins P6 engine.
I need to transport it and I think it is too heavy for my truck.
I cannot find any information regarding the specs on this item.
Thanks, Willsy.
- Mon Jan 04, 2016 9:49 pm
- Forum: Fordson F, N and E27N Major
- Topic: E27N P6 Dash switch rubber buttons
- Replies: 7
- Views: 12486
Re: E27N P6 Dash switch rubber buttons
Thanks for all the information, but I'm sure somebody was selling them on E Bay UK about 2 years ago or a tractor parts web site but I cannot find any information who did sell them.
Again Thanks,
Willsy.
Again Thanks,
Willsy.
- Wed Dec 30, 2015 11:53 pm
- Forum: Fordson F, N and E27N Major
- Topic: E27N P6 Dash switch rubber buttons
- Replies: 7
- Views: 12486
E27N P6 Dash switch rubber buttons
Hi, Can anyone please help me to find where I can obtain the rubber/brass tagged starter & heater buttons for a P6.
Thanks, Willsy.
Thanks, Willsy.
- Tue Oct 06, 2015 2:39 am
- Forum: Ford and Fordson Conversions
- Topic: E27N County Full Track Parts required- Aus-Melbourne
- Replies: 1
- Views: 4661
E27N County Full Track Parts required- Aus-Melbourne
Hi,
I have obtained a county full track very complete, engine seized. The only parts that are missing are a draw bar assembly & a seat.
if any body has an old seat for copying &/or a good one to sell please contact me.
Thanks, Willsy.
I have obtained a county full track very complete, engine seized. The only parts that are missing are a draw bar assembly & a seat.
if any body has an old seat for copying &/or a good one to sell please contact me.
Thanks, Willsy.
- Tue Jan 22, 2013 12:55 am
- Forum: Fordson F, N and E27N Major
- Topic: E 27N P6 check chains Brackets (Australian)
- Replies: 3
- Views: 6448
E 27N P6 check chains Brackets (Australian)
Hi, With the Australian P6 rims with the inner weight ring cast into the rim, the check chain bracket that is bolted to the axle tube it is running very close to the rim. I see in books that the bracket can be drilled with a third hole much higher which will clear the inner ring weight area, as the ...
- Thu Jan 03, 2013 11:57 pm
- Forum: Fordson F, N and E27N Major
- Topic: Australian replacement pre cleaner element - E27N P6
- Replies: 2
- Views: 5099
Re: Australian replacement pre cleaner element - E27N P6
Thanks Barry,
I will try to soure one.
Again Thanks. Willsy.
I will try to soure one.
Again Thanks. Willsy.
- Wed Jan 02, 2013 12:56 am
- Forum: Fordson F, N and E27N Major
- Topic: Australian replacement pre cleaner element - E27N P6
- Replies: 2
- Views: 5099
Australian replacement pre cleaner element - E27N P6
Can anybody tell me were or the part number to obtain a new dry replacement pre cleaner element of a E27N P6 Fordson.
Thanks, Willsy
Thanks, Willsy
- Mon Jul 02, 2012 2:59 am
- Forum: The PARTS SWAP forum!
- Topic: E 27 N Gearbox Part required-Aus
- Replies: 0
- Views: 2742
E 27 N Gearbox Part required-Aus
Over the weekend I was rebuilding the gearbox (Bearings & Seals) I was installing the pins that retain the transmission brake plates, when i was torqueing up the short pin i broke the pin. When looking at the pin it was cracked half way through. I'm hoping someone has a gearbox that they are parting...
- Tue Mar 20, 2012 3:22 am
- Forum: Fordson F, N and E27N Major
- Topic: E 27 N Repo Grills Narrow tyre For P6 In Aus
- Replies: 0
- Views: 2973
E 27 N Repo Grills Narrow tyre For P6 In Aus
Hi,
I'm new to the site can anybody help me with the narrow tyre front grill?
Where can i obtain one or who makes repo one's that i can purchase.
Any help would be apprecated.
Thanks Willsy.
I'm new to the site can anybody help me with the narrow tyre front grill?
Where can i obtain one or who makes repo one's that i can purchase.
Any help would be apprecated.
Thanks Willsy.