The Fordson Tractor Pages Forum

Have finally changed the pump and all is now working fine. Haven't really done enough with it to see how much weight it will lift but it is working.

Thanks Emiel. The pump is transmission mounted and I am led to believe that there is no intake screen and filters have been changed. I have changed the pressure relief valve with no success and have a replacement pump waiting to be fitted but due to moving to a new farm I have not had the time to sp...

I am having problems with the hydraulics on my 4610. The lift arms ( also loader and spools) lift very slowly and judder as if there is low oil level (it is full). Not sure what it will lift currently but it will still lift the pickup hitch with a trailer on. The oil filter was changed a few months ...

How much for the 4000 one?

Does anyone know where to get replacement seals for one of these from?

Do you have any pictures?

Ben
You may find the 4000 check chains are too long for the dexta and you need to cut a link out of the chain. I know the 5000 chains are longer than the 4000 and the 4000 is a bigger tractor than the dexta.

Probably wouldn't matter which one but the turbotiller uses a chain instead of a top link as standard factory spec

Replace the top link with a chain. Our Bomford Turbotiller has that setup and it allows the machine to follow ground contours whilst still being mounted although not much ground clearance at the back unless the chain is shortened

SVS in Cardiff did a good job for me very quickly and a good price too. Do NOT use Brian North of Cardiff

That is some major adjustment

Hi Graham
Try the following link

http://partstore.agriculture.newholland ... 87ar916136

It shows the steps parts including brackets

Hi Graham
Try the following link

http://partstore.agriculture.newholland ... 87ar916136

It shows the steps parts including brackets

Hi Graham, The thing is that although there are over 1700 members on here you will find that very few are active members and of those the number of people interested in the World Series is low - Major and Dexta seem to be tops. I have quickly checked my workshop manuals and have not been able to see...

they often appear on ebay

and the early ones retained the Ford 4000 cab too

600 series have dry filter accessed through round screw on cover on right side of front cowl. Is his an early model which may have been on the changeover or were export versions different?

HP is different and another 2 obvious differences are the air filter (dry on 4600, oil bath on 4000) and the hydraulic system (4600 has 2 levers - one position and 1 draft whilst 4000 has one lever and a changeover). I believe the HP increase was achieved by tuning the fuel system but not sure if it...

Are they the same as the later Fords? I know I have used one off a Ford 600 series in the past

It may be branded Fomoco but the name Gold Star springs to mind for that compressor. It was purely for blowing up tyres (and slow at that being only a single cylinder). Incidentally I would lengthen the chain so it is horizontal as that makes the unit jump about less (and was the natural position ba...

Don't forget that the battery terminals are different sizes for positive and negative so you should be able to identify the polarity (assuming you haven't removed the cables also

I remember seeing an issue where the circlip holding the shaft breaks due to the implement PTO shaft being too long and this caused some issues but can't remember if it was jumping out of gear

Looks very dodgy to me

It was you I was thinking off when I posted as knew you were on there too. New forum seems to be gaining momentum well. I think it is a lesson for all forum admins (I know having been there too) to always install patches and run the latest versions of software and to do secure backups to a separate ...

Not sure how many people on here are / were members of the British Farming Forum but since it was hacked earlier in the week it has disappeared without trace. There is however a new forum at http://thefarmingforum.co.uk which is set up by Clive (a member of BFF) and this has in 2 days gained about 5...