The Fordson Tractor Pages Forum

Hi All Another little problem I have. All the ends on my lower link arms were badly worn so I brought new ends and welded on, what I didn't realise is that the ends are different, either they have been put on wrong many moons ago or the pins on the tractor end is wrong. It looks to me that the imple...

Thanks Ben I'll post when I find something. There is a couple of working days locally hopefully find something and have it ready by then.
Phil

Thanks for this Ben. Now I'm showing my ignorance when it comes to ploughs, but can you tell me the difference between epic and yl bodies, I believe there is also USN. I know they are different shapes but what difference does it make ploughing, I presume that they have different uses but I don't kno...

Hi Guys What would be the best plough for a Super Dexta? I have made contact with the original owner from new and he informs me the Dexta used to pull a Ransomes 3 forrow 12" plough. As the old girl is getting on a bit I was thinking of 2 furrows, but what one? I hav'nt done any ploughing with a tra...

I'll try like you say with some scrap parts Robert. Kev would you know, is the clutch pedal cast steel or cast iron. I vaguely remember something about cast iron having different sparks. The tube I was thinking of brazing in would be a bush, I don't fancy drilling out any further as the oridgial pie...

Hi All Does anybody know a good brazing/silver solder rod suitable for stainless steel to mild steel or cast, I want to braze a bush into an elongated hole on the clutch pedal where the clevis pin goes in. I've found a piece of stainless tube which is just the right size. If this is a no go, has any...

Thanks Bensdexta thats the one, worn the same as the picture. I've found a high tenstile bolt of the same diameter as the dexterous pin cut and formed the same and pressed in. I've been rebuilding a 1962 Super Dexta almost got the power train together now ready for a respray, I'll put same pictures ...

Hi All Can anybody tell me if the stop pin on the position control linage should have a grove cut in it were it rubs on the ram arm linkage (its a it like a cam on the side of the ram arm linkage). Mine has a grove in the stop where it hits the ram arm linkage cam, the grove is about half way though...

Hi All I'm in the process of restoring my SuperDexta and like the rest of you the gear shift is a bit dodgy. The gearbox is in bits on the garage floor at the moment ad it is now an idea time to change the cups or what ever you want to call them (what the gear stick go's into) thing is doe's anybody...

Hi All I am new to the forum, and have just purchased a 1962 (going by serial No) Super Dexta Serial Number 09B715964 Engine /no 37111310R I think difficult to see Clutch casting H14H Gearbox H14H Hydraulic casting N12H or H12H difficult to see Rear axle right H13H left H13H