Search found 1924 matches
- Fri Dec 29, 2023 9:05 pm
- Forum: Fordson New Major
- Topic: engine/transmission dowel pin question
- Replies: 17
- Views: 977
Re: engine/transmission dowel pin question
Had a good Christmas and hope you have too. Are you sure the holes are clean? On Super Billy the dowels stayed in the gearbox, leaving the engine holes empty for cleaning. I suggest you check that before anything else. A pic would be handy, but I'm unable to post one right now, I'll hopefully manage...
- Wed Dec 27, 2023 10:23 pm
- Forum: Fordson Dexta
- Topic: Old fuel filter
- Replies: 6
- Views: 598
Re: Old fuel filter
Dexta's had both AC and Tecalemit filters, and there is a possibility that similar types were used but I suspect they're not the same. The elements might be interchangeable though.
Sandy
Sandy
- Wed Dec 27, 2023 7:28 pm
- Forum: Fordson New Major
- Topic: question about O-ring power steeering cylinder
- Replies: 15
- Views: 5429
Re: question about O-ring power steeering cylinder
I see what you mean, it is strange though that you both have that on units supposedly made after the manual supplement from 59. An original manual on the power steering when first introduced would confirm this, as the wording in the I&T and in the 59 supplement suggest the o-ring was fitted to all v...
- Tue Dec 26, 2023 8:10 pm
- Forum: Fordson Dexta
- Topic: Decipher tractor serial number etc
- Replies: 1
- Views: 286
Re: Decipher tractor serial number etc
Difficult to tell what you have, but from the few codes there are (most are part nos.) it looks like a 63 with mixed parts. See if you can find the serial number and engine number as that gives us something to aim for. There were no colour options, only changes at certain periods (restyle in 60 with...
- Sun Dec 24, 2023 5:22 am
- Forum: Fordson Dexta
- Topic: Old fuel filter
- Replies: 6
- Views: 598
- Sun Dec 24, 2023 5:19 am
- Forum: Fordson New Major
- Topic: petrol / kero
- Replies: 48
- Views: 28621
Re: petrol / kero
The gear is pressed on, but the pump needs to be off and open for this to set the clearances specified on reassembly.
Sandy
Sandy
- Sat Dec 23, 2023 11:52 am
- Forum: Fordson Dexta
- Topic: Old fuel filter
- Replies: 6
- Views: 598
Re: Old fuel filter
Try this: viewtopic.php?f=1&t=5024&p=53955#p53955. I didn't think an MF filter would fit a Dexta, but I don't know what filters they used.
Sandy
Sandy
- Sat Dec 23, 2023 10:55 am
- Forum: Miscellaneous topics
- Topic: Happy Xmas!
- Replies: 2
- Views: 510
- Fri Dec 22, 2023 6:35 pm
- Forum: Miscellaneous topics
- Topic: Foot throttle
- Replies: 1
- Views: 240
Re: Foot throttle
I'm not familiar with the Agriline setup, I'll show you what someone put on Billy before we had him. https://i.postimg.cc/q7WTz5Rq/2019M6-8.jpg https://i.postimg.cc/ZKJhB3T8/2019-M17-22.jpg https://i.postimg.cc/ZY2TW0Wj/2021-H20-11.jpg I do have in mind that this is not as easy with a Super Major bu...
- Tue Dec 19, 2023 11:24 pm
- Forum: Fordson New Major
- Topic: petrol / kero
- Replies: 48
- Views: 28621
Re: petrol / kero
Unfortunately you've just come across yet another case of poor repro parts. See what the original pump is like, as it might still be better (Grani fond some new ones in very poor condition). In any case you'll need to either use the original drive gear or cut a new groove in the correct location on ...
- Sun Dec 17, 2023 12:43 am
- Forum: Fordson Dexta
- Topic: Hydraulic control issues
- Replies: 12
- Views: 5722
Re: Hydraulic control issues
Glad it's sorted.
Sandy
Sandy
- Fri Dec 15, 2023 10:32 pm
- Forum: Fordson New Major
- Topic: camshaft bearings Ford 590E
- Replies: 3
- Views: 649
Re: camshaft bearings Ford 590E
I think you'll probably have to make them, but Mathias has a good starting point.The part numbers are 508E-6261 for the front one and 508E-6262 for the other ones. There are two suffixes, E means std ID and OD, F means std ID 0.020" OD O/S. I think there might be more but I can't find anything.
Sandy
Sandy
- Fri Dec 15, 2023 12:39 am
- Forum: Fordson Dexta
- Topic: 1964 Dexta Colour
- Replies: 1
- Views: 532
Re: 1964 Dexta Colour
The colours were NP blue and NP grey, and they're quite different from both the earlier and later colours. I suggest you match some paint to get a good finish, but make sure your Dexta is nice and clean first. The badge is the simple wheatsheaf in NP grey.
Sandy
Sandy
- Tue Dec 12, 2023 12:32 am
- Forum: Fordson New Major
- Topic: 1963 FSM rear wheels scalloped or not
- Replies: 14
- Views: 3328
Re: 1963 FSM rear wheels scalloped or not
I might have got confused with the front wheels, for the new casting didn't appear imediately and Stuart Gibbard shows a prototype with all extras and the early front wheels.This might however again be to do with stock parts.
Sandy
Sandy
- Mon Dec 11, 2023 2:23 pm
- Forum: Fordson Dexta
- Topic: Hydraulic control issues
- Replies: 12
- Views: 5722
Re: Hydraulic control issues
There are three details that require a special tool according to the Ford manual, but this can be done without them. The arms should be 1/2" above the lowest position, they can be locked by tightening the mounting bolts for the adjustment (remember to loosen them to the correct torque before assembl...
- Fri Dec 08, 2023 1:37 am
- Forum: Fordson New Major
- Topic: 1963 FSM rear wheels scalloped or not
- Replies: 14
- Views: 3328
Re: 1963 FSM rear wheels scalloped or not
Earlyish March 63, nowhere near the end for there's more than an extra year to go till the last one. The casting codes you've posted fit nicely, see what many others you find. The serial number includes the prefix, without which the year is impossible to know, main numbers were repeated in 63 and 64...
- Fri Dec 08, 2023 1:28 am
- Forum: Fordson New Major
- Topic: Gearbox refill setups!!
- Replies: 9
- Views: 1640
Re: Gearbox refill setups!!
Probably worth adding a coupling to that arrangement to allow you to remove the hose when you're not transferring the oil. Then you can enjoy your Major properly! I agree replacing the seals is a job you want to plan for, as it will inevitably mean that you have to spend several hours on it and be c...
- Thu Dec 07, 2023 12:21 am
- Forum: Fordson New Major
- Topic: 1963 FSM rear wheels scalloped or not
- Replies: 14
- Views: 3328
Re: 1963 FSM rear wheels scalloped or not
I think I'm right in saying that there were a few Power Major's that still had the early wheels, but it might have only been to use up stock parts. I haven't been able to find anything definitive on this though.
Sandy
Sandy
- Wed Dec 06, 2023 2:01 pm
- Forum: Fordson New Major
- Topic: FSM
- Replies: 1
- Views: 805
Re: FSM
Nice Super Major, you seem to have the arms for the pick up hitch, as well as the frames for a Mil loader and earlier Major wheels everywhere. I don't think it's an NP, and you also seem to have the earlier lifting rod on the RH side. A serial number would be great, as well as more pics.
Sandy
Sandy
- Tue Dec 05, 2023 10:57 pm
- Forum: Fordson New Major
- Topic: 1963 FSM rear wheels scalloped or not
- Replies: 14
- Views: 3328
Re: 1963 FSM rear wheels scalloped or not
I think so, 12-36 wes often fitted back then (at least here) as Billy and Super Billy and the half Super Major had them (Billy is back on 11-36 now) and they appear to have been fitted new. With an NP the 12-36 will give higher speed and probably without too great a pulling penalty, if however you w...
- Sun Dec 03, 2023 10:55 am
- Forum: Fordson New Major
- Topic: First Start After Rebuild
- Replies: 11
- Views: 2121
Re: First Start After Rebuild
As far as I know Billy has never had an exhauster, but as the engine is not original it could have come from a lorry. On tractors they're pretty rare and almost exclusively on industrial ones, there do seem to be a few of those still around. As far as I know there aren't any farm trailers with speci...
- Sat Dec 02, 2023 2:32 pm
- Forum: Fordson New Major
- Topic: First Start After Rebuild
- Replies: 11
- Views: 2121
Re: First Start After Rebuild
It is indeed for brakes, the lorries had a hydrovac system, and a few tractors had a lever operated vacuum brake for trailers (but not the tractor itself). There's a whole section on this in the manual: https://www.fordson.se/8_9_Broms_sl%E4p_och_Elsystem_Suplement_Verkstadshandbok_001-012_och_001-0...
- Fri Dec 01, 2023 11:22 pm
- Forum: Fordson New Major
- Topic: First Start After Rebuild
- Replies: 11
- Views: 2121
- Fri Dec 01, 2023 11:05 pm
- Forum: Fordson New Major
- Topic: First Start After Rebuild
- Replies: 11
- Views: 2121
Re: First Start After Rebuild
The O-ring in one of the pictures, is it the one that needs to go between the block and head gasket? That's the seal for the oil feed plug screw for the vacuum exhauster. If it doesn't leak you're better not to disturb it as very few have moved since initial assembly at Dagenham, making for some po...
- Fri Dec 01, 2023 6:58 pm
- Forum: Fordson New Major
- Topic: Minimec timing mark missing
- Replies: 5
- Views: 1908
Re: Minimec timing mark missing
You seem to have a problem many people have, for that is not the original coupling. The original mark is much neater. 23º BTDC is correct.
Sandy
Sandy