The Fordson Tractor Pages Forum

HI weve just reasently set up a twin double actiong remotes that we can swop between our diffrent e27s so far its been on the county crawler and roadless half track working our trailing plough it feeds out that port and the return go's in the fill port the arms are normaly tied up to prevent loss of...

interesting to see the difrences power farming 1953 states for aus spec tractors with cast wheeles and i think full water 6775 lb 13x28 7500 lb halftrack p6 7532 lb on 13x28 7623 for halftrack crawler 7480 p6 8370 no wonder my truck complains with the halftrack and crawler on thow its pretty weak b

early had carry over n wheel as with air cleaner mid range bakalite late had aluminium

h http://i1096.photobucket.com/albums/g321/brockwood1/e27trike_zpsbe221131.jpg HI don’t know if its much help but my fordson farm major manual shows the rowcrop trike front end and talks about the range of rear track settings which I be live are in the normal range 52 to 72 in by various combination...

thanks she goes ok geared to 85 but will go up most at that going to throw the cft on and take her back to the bloke i got it her off this week to show what weve done motor appears to be an upright 380 full govened if i was real keen i could use it to turn my 754 super 4 into a super 6 but im not b ...

hi all an update got it passed today ended up using an 80 mm outer 23mm inner circle cutter to cut 2 disks out of conver belting cut the 6 groumet holes with a bit of 1/2 inch stainless milk tube in the pedestal drill using the old one as a template its working fine b

hi all having a bit of trouble with my k series ford /thames trader nc . fordson carrier last thing to do for club reg i am after what my parts book calles a steering coupling [rag joint]? its parts no was e279la5 compleate or it lists a replacement rubber as disc coupling e288la5 had no luck hear y...

front and rear of p6 rims http://s1096.photobucket.com/albums/g32 ... p6rims.jpg

http://s1096.photobucket.com/albums/g32 ... ymount.jpg

mine and i have seveal are like franks 51 all are 28s thow i have seen 26s the inner halfs are much the same but there is a veriety of outer half widths from 3 to an 8 inch which will take a moden 16 28 i also have a set of p6 rimsthat the inner is much heavier so much so that the inside grazes the ...

click on the next for the rest

a roadless and a county plus a few more of our toys all e27s
sorry cant get the pics to direct post try this link http://s1096.photobucket.com/albums/g32 ... oadles.jpg

http://s1096.photobucket.com/albums/g321/brockwood1/ sorry try that b

Hi all well colacs over though im yet to unload start of our season just had Orford next acme field days at Allansford then Cobden followed by our home event at Laang any way hears a link to videos and pics from Colac as I like different things my highlights were the tractor wagon green n with a hoe...

Hi i think what your percived problem is that the major backend was built for a 1200 rpm motor the e27 when the new major came out it reved harder so it could be a problen you were surposed to back off which mucked up speed and power and each new modle reved harder which makes it even worse however ...

typo 68 db should be able to top that

colac vic aus heritage weekend 4/5 feb ford fordson feature trying to beat db 160 last year taking e 27 county cft and raadless half track been working on halftrack all week welding on 130 packers on traclockers to get them to work right a bit tedious any way back to the welder b

hi knocks can be funny if its timing related it may be just that. there all a bit diffrent depending on health my county wasent real happy any where and had soft compression on 1 and 4 did the valves and now when idiling around is happy at advance but when working it wants to be just off the stopper...

Hi ben what u have is most likley a maidrire overdrive the odd one about but so far i havent managed to coller one 25% increase allso avaiable as an underdrive 20% reduction this it was claimed could be fited in 8 hours by a competent mechanic it involved splitting the tractor and would fit any of t...

talking of the front idler mine were both hanging back in the fork one to the point of lightly rubbing on the fork I couldn’t get the bearings out took to local engineer who made up a mandrel and got it out and fitted bearings were quite resalable . perkins tappet are .010 th or .254 mm engine warm b

hi as far as i know and one allways learns the crank should have the spring how ever if the dog is a bit worn it can make it jump out the flat grill i belive is pre 48 49 suposedly they changed when the perkins came out to improve cooling which is that time however we are allways a bit behind out he...

looking good tracks apper good about the only thing you cant get. clutchs allways a problen more so on p6 mines petro kero i get clutch fade if i turn to mutch one way, ajustment some times either wont drive or wont let go to turn thow tuch wood ok at moment mine had brocken axcle housing when i got...

hi for moretoot imnot quite clear thow iv had mine in bits im only guesing what does what. do you have a diagram you could post .is the valve your ajusting the top one worked by the cam with the hole in it and you work threw the hole and does oil come out that in hold or just in drop .had mine on be...

its a prety low figure but about what i expected a 5000 would nearly double that and to work a loader for example you realy need 10 gallons min or the cycling times are too slow but its quite ok for a bare tractor as far as staying up bare arms mine stay up went to my county today hadnt been going s...

hi just put gauge on two other units both doing 1600lb @3 imp gals b

hi heres the video hope its of some help b http://youtu.be/Ae869Z4mxDc