The Fordson Tractor Pages Forum

All TS 59 have a depth wheel and cat2. Maybe it's a Robin for use behind a Dexta. Pictures will sort it out.

According to Brian, the best way to do this work is to support the engine well and lock the rear wheels with the handbrake. This is importent for your safety. Remove the hood. Loosen the steering rod. Disconnect the lighting wiring. Drain the radiator and disconnect hoses. Loosen the U beams at the ...

Just keep looking. Years ago someone asked through the website of our local classic tractor club if anyone knew where his grandfather's Fordson New Major had gone. Five years later the answer came from a trader I knew personally. He had bought the tractor from his grandfather and sold it on to anoth...

https://scontent-ams4-1.xx.fbcdn.net/v/t1.0-9/138977026_2546402405660253_9109297120780735594_o.jpg?_nc_cat=100&ccb=2&_nc_sid=b9115d&_nc_ohc=c4KU5uosRfkAX_t5TVC&_nc_ht=scontent-ams4-1.xx&oh=64f069c93efc51e74bacd4c739db2ecb&oe=6025A242 Found this picture on facebook today. It's at Vlissingen Holland ...

Wish you all a happy and healty New Year

Merry Christmas to you all our members.

Moved the same topic from the Major forum to Miscellaneous topics so please reply there. Thanks for starting the wishes Kiwi Dexta.

Merry Christmas to all our members from Holland.

(this topic is moved from the New Major forum) Tought this was a better place.

Nasty thing to find. Hope you can cure here broken back.

Thanx Billy. And it was even so close in Holland.

Does anybody have a digital sparelist of the Delta series tot put on the site?

Amy thanks

I have a question from a friend of mine. What is the thread on the Dexta series?
The Major is UNC / UNF, so I suspect with the Dexta as well, but the engine is made in England. Is it then equipped with Whitworth?

Good job Keep going.

Always glad to read that a Major has been brought to live again.

It's a thin bush that can be made on a lathe. It should be made from brons.
Mine has a grease niple. The bush should have a grease grove in the length with a hole corresponding with th greas niple.

You could make one. No hard job. You only need some tools to make the holes. The rest is easy.

@Peter2, had the same problem.

@Shepp, I agree with you.

I bought my king pins years ago from Old20. Still steering with them.

You see diesel, but is it enough. Could be dirt on the tapfilter or even water in the tank. So remove the fuel line from the tap with the tap closed and than open it. Look for any water coming out. If it runs enough diesel than work the fuel system op to the top of the diesel pump by cranking the di...

First check the oil level from the gearbox. Behind the clutch pedal.

But the name is French

From the moment Mathias and I took over the Fordson Tractor Pages (FTP) site, the idea was to add the site of the former Ford and Fordson Club Netherlands (FFCN) to the FTP site. The FFCN was founded in 2010 but has never blossomed. The club was dissolved in 2018. The FFCN site was started when it w...

Thanks Sandy.
I used oil, did'nt know.